Käyttäjän metalfusionf kanava
Loading...
75
subscribers
81,706
video views
Uploaded videos
1-10 of 22-
Running in and stress testing my wooden clock mechanism
metalfusionf
215 views
This is my DIY cnc project wooden gear clock made from 10mm MDF.
There is quite a lot of friction in the gears, and I'm hoping to reduce some of that by running them at hi...
-
Complex wooden clock mechanism test run. DIY CNC Project
metalfusionf
312 views
I finally got all the gears cut and fitted. There will be three clock faces, hours, minutes and seconds each have their own face. This set of gears runs all of them with si...
-
New project with diy CNC
metalfusionf
598 views
Something big in the making...
-
Planetary gearset prototype for Kinetic sculpture cut from MDF with DIY CNC
metalfusionf
871 views
Prototyping some gears for a much larger / complex kinetic sculpture / wall clock project that is now in the design phase.
It will probably be driven with a small stepper ...
-
Aluminium and plywood cutting - testing my new camera HD
metalfusionf
273 views
First video with my new camera: Canon Ixus 115 HS. My videos will be in HD from now on.
I was cutting one more hold down clamp from aluminium and parts for a small stand...
-
Cutting some cardboard, making a head.
metalfusionf
423 views
Sliced up a free head model I found from the web and cut it out of 4 mm cardboard, finished head has 61 slices.
http://i.servut.us/i/STP81369.jpg
2 mm dia, 2 flute sp...
-
Aventador Halftone cut by DIY cnc router
metalfusionf
2,828 views
Pattern & GCode generated with my free software "DXF Halftone 2.0", available here:
http://www.students.tut.fi/~syvajar3/
Finished artwork:
http://i.servut.us/i/STP813...
-
Diy cnc cut halftone pattern
metalfusionf
41,901 views
3774 holes, ~1/s
Finished pattern:
http://i.servut.us/i/STP81149.jpg
NOTE!!!
I have released a new version of the DXF halftone program ( v. 2.0 ) 8.8.2011
It has...
-
Honeycomb pattern cutting test
metalfusionf
215 views
15mm plywood, 12mm deep pockets.
6mm 2-flute carbide endmill.
6mm DOC.
Feed rate: 900mm/min
-
Diy cnc aluminium speed testing & crash
metalfusionf
9,932 views
area clear 2500mm/min max., 0.5mm DOC
finishing pass ~1500mm/min, 0.5mm DOC
cutout & crash ~3000mm/min, 0.8mm DOC
Advertisement
About Käyttäjän metalfusionf kanava
more
less
Play all(22)