medhist2006's channel

medhist2006 commented 3 days ago

3:05 Add to

Old Devil Moon - sang by - me :P

Just me playing with the sound recorder again. Comments welcome thank you x

283 views

medhist2006 said:

Great job. I hope you do more:)

• 8:31 Add to

  Lee Precision Pro 4-20 Electric Casting Pot Overview

  Fresh out of the box, and it is the best money you will ever spend on casting bullets or fishing sinkers.

  4,677 views

  medhist2006 said:

  @eXdXgXe4life .try adding some linotype if you want the bullets harder. I shot hundreds of 44mag with wheelweights. If your going to crank up the velocities you need a harder alloy. Another thing you may consider is heat treating your bullets in the oven.

+ One more videoshow less

medhist2006 commented 2 months ago

5:31 Add to

Martini case forming.avi

Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

4,386 views

medhist2006 said:

Couldnt get a pick in to move it. Used the lead idea. put the die in a freezer for a couple of hours. Two taps with a large punch and the whole thing came out beautifully. A lifesaver. Many thanks:) Saved me sending it back to Lee

• medhist2006 commented 2 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  Time for me to admit I made a mistake. THe wall of the shotshell case is much thinner than the drawn case and obvously more fragile. Having reduced the diameter to 9/16" using an opened fl sizing die I attempted to take it to the factory size using my fl sizing die. Properly lubed it ran it throu...

• medhist2006 commented 2 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  ,e again:)

  I made a holder like toy have out of a copper sleeve. 8 sec on the torch does it . You are correct. the light pitting was from overheating.

  Its not visible in the video but did you remove the depriming rod from your die for the final sizing?

  Manythanks

• medhist2006 commented 2 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  just a thought.. wouldnt it be a good idea to anneal the cases after final sizing? I notice the nexks of my cases have developed what i would call very fine pitting. Is that a heat issue? many thanks. Now to order that rifle:)

• medhist2006 commented 3 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  I dont have access to a lathe so I trim mine like they showed in the forum. Two pieces of wood with a 5/8" hole in it. put it in a little drill press vise and used a Forester 1" cutter to trim them down, Accurate to about .o2 "

• medhist2006 commented 4 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  @ginsboy2003 THank you. That makes perfect sense. I thought I would need to leave the wrench flats on the die incase I needed to press out a stuck case but with a 9/16" hole you can just frop a rod down and tap it out:) As soon as I make some cases I will be getting a rifle(or two) from IMA.

• medhist2006 commented 4 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  I contacted Lee and bought a fl die body. THey told me the die is carburized to a depth of .008-.010 file hard. Now Im looking for someone to bore it out to the 9/16" and cut down the top. Why was the top cut down?

• medhist2006 commented 8 months ago

  5:31 Add to

  Martini case forming.avi

  Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

  4,386 views

  medhist2006 said:

  the high cost of brass kept me from buying a MH. I dont know how i would get the 9/16" hole drilled. possibly Lee would do it? for a fee of course. I visit not too faqr far from their plant.Exceelent videos. tyvm:)

+ View allshow less

medhist2006 commented 3 months ago

1:46 Add to

Cannon project

Building a black powder cannon

3,439 views

medhist2006 said:

THat is a beautiful job. Oh to have a lathe:)

• 1:28 Add to

  cutting gears on a lath 1

  little demo on cutting skew gears at the estavan modle engineering show. they will be for a steam roler.

  15,503 views

  medhist2006 said:

  what make and model lathe is that?

+ One more videoshow less

medhist2006 commented 4 months ago

0:21 Add to

M11 WITH SUPPRESSED .22 UPPER CONVERSION

M11 9MM WITH A SUBCAL .22 COVERSION. 75 ROUND RUN, SWR SUPPRESSOR.

2,540 views

medhist2006 said:

what mags are you using?

• 1:31 Add to

  How to Jewel a Rifle Bolt

  Jeweling is a classic treatment for a rifle bolt. Watch Larry Potterfield, Founder and CEO of MidwayUSA give a Remington 700 bolt this classic tre...

  4,756 views

  medhist2006 said:

  What make is that index holder?it lookS more useful than many I have seen, Thank you

+ One more videoshow less

medhist2006 commented 5 months ago

1:30 Add to

How to Jewel a Rifle Bolt

Jewelling the bolt on a rifle can add a real touch of class. Join Larry Potterfield, Founder and CEO of MidwayUSA, as he jewels the bolt on a Winch...

77,585 views

medhist2006 said:

@MidwayUSA

Sorry. I was referring to the holding/indexing fixture

• 1:30 Add to

  How to Jewel a Rifle Bolt

  Jewelling the bolt on a rifle can add a real touch of class. Join Larry Potterfield, Founder and CEO of MidwayUSA, as he jewels the bolt on a Winch...

  77,585 views

  medhist2006 said:

  I would love to jewell the bolt on several rifles but this jig is no longer available. anyone know of a different suplier?

• 1:32 Add to

  How to Glass Bed a Rifle Stock

  Glass bedding is a major component of the ultimate bedding package for rifle accuracy. Larry Potterfield, CEO and Founder of MidwayUSA, demonstrat...

  36,100 views

  medhist2006 said:

  I have learned something from every one of these videos. I wish they were longer too. Much better quality then a couple of specific videos I paid for.

• 6:08 Add to

  Martini Henry Reloading Tricks

  A short video describing the process by which I reload in a historically accurate manner for my 1879 Martini Henry

  2,831 views

  medhist2006 said:

  did you use the 480 Ruger die to seat the bullet as well?

+ 2 more videosshow less

medhist2006 commented 8 months ago

4:10 Add to

내 영혼이 은총입어(Where Jesus is, 'tis Heaven there.Trumpet, Trombone, Piano)

Where Jesus is, 'tis Heaven there.

Trio for Trumpet, Trombone, Piano

Arranged by Hye Young Cho

트럼펫 : 김영민

트롬본 : 권오태

피아노 : 신혜정

명성교회 김삼환 목사님 LA 집회

1,176 views

medhist2006 said:

THats beautiful . how long have you been playingf trombone?

• 2:01 Add to

  Smoking a small Brisket on a basic grill

  This shows a step by step on how to smoke a Brisket on a regular grill featuring "the Tarbox Ramblers" THIRD JINX BLUES

  48,261 views

  medhist2006 said:

  7-8 hrs? did you have to mop it frequently? Also did you have smoke being produced for the entire time?

  THanks:0

+ One more videoshow less

medhist2006 commented 8 months ago

5:31 Add to

Martini case forming.avi

Here is a video I made showing how to form 577/450 Martini cases from 24 ga. shotshell brass. Its not hard, but even easier when you see the vide...

4,386 views

medhist2006 said:

the high cost of brass kept me from buying a MH. I dont know how i would get the 9/16" hole drilled. possibly Lee would do it? for a fee of course. I visit not too faqr far from their plant.

• medhist2006 liked 8 months ago

+ One more: Likedshow less