mbr72cnc's channel
Loading...
12
subscribers
8,602
video views
Uploaded videos
1-10 of 35-
The Bungalow
mbr72cnc
255 views
Plaque made for my daughters out of pine wood. Used ArtCAM Express 2011 to make the model and g-codes. Great CAM software, get many 3d reliefs to use in projects plus can a...
-
Cabinet Sides.wmv
mbr72cnc
257 views
Cutting out cabinet sides, will cutout 2 sides per sheet material. Machining time was approx 35 minutes. Hell of allot faster than the old standard way, table saw, routers,...
-
Hummingbird.wmv
mbr72cnc
209 views
Making a hummingbird sign for fun. Cutting onto pine wood, not my first choice but is what scrap I had on hand at the time. Though it turned out well, the vcarving of the t...
-
Baby announcement.wmv
mbr72cnc
76 views
Plaque for baby announcement, done on aspin will be stain then varnished. Later I will add text for the customer (whom ever buys this plaque). Model was purchased through V...
-
Goodnight Moon Plate.wmv
mbr72cnc
163 views
Machining a plate, back side first then the image on front. Models are from Vectorclip3d there is also a tutorial on how to machine these. I cut mine with a 1/4 ballnose on...
-
VM_Buffalo.MOD
mbr72cnc
91 views
Simulation of VisualMill cutting a plaque for my son. This was all done with VisualCams plug-ins VisualMill and VisualArt. VisualArt generated the Buffalo from a dxf (thank...
-
the shack.wmv
mbr72cnc
218 views
Machining a 3 dimensional plaque for my brothers step sons. Made from pine, dimensions are 20 inches x 10 inches. Showing the finish pass using a 1/8 inch ball nose, with a...
-
CNC Carvings.wmv
mbr72cnc
1,013 views
Some photos of my projects that can be done on the cnc router. The software that I use to create engravings and carvings is Vectrics PhotoVcarve, Cut2D, VectorArt 3d Machin...
-
Verifying code.MOD
mbr72cnc
87 views
Verifying a gcode (dry run) before cutting materials. I ran this code on my old machine, just wanted to make sure everything was ok to run on the new machine. I would rath...
-
Tailgate toss 3.MOD
mbr72cnc
110 views
Engraving the sides for the cornhole (I call mine Kornholeo) with the customers name as requested. Then will do a perimeter pass. I could have done the perimeter with the t...
Advertisement
About mbr72cnc's channel
more
less
Play all(35)