mauipalmandtreecare's channel

thats one helluva saw. i run .404 .63 skip chisel on mine. 32" husqy bar. just completed my rebuild on it. new carb, new seals, new fuel line, new intake block, new rings, removed the base gasket and muffler modded it. i modded my muffler by taking the deflector off and dremel'd out the round hol...

now that was COOOOL!

sounds like you need to tune it a little bit richer on the H screw

@atomichead777 she has big areolas haha

disaster!! did it save out? :O

jen, will you marry me please????

@rogue200sx dude you gotta check out the modded 359 videos. i have 3 359's i run in my tree business and im sending one cylinder off to get ported. screamers! :D

text book would be 1/3 the diameter of the tree for the notch. also never cut above your chest EVER!! you have less control over your saw if it were to kick back and its right in line with your jugular vein.

nice drop but for gods sake get some PPE you gonna get hurt man. it takes just one brush on the leg to send you to the ER. i figured if a $100 pair of chaps saves me from a $1000 doctors bill its worth it.

man sooo many haters. i thought he made a good drop. the back cut coulda been alittle cleaner but, this guy isnt a professional like me so he doesnt have the tricks of the trade yet.

@grt20002 that was pretty judgmental and not well thought out. talk to me when you do your homework on muffler modding then we can talk.

whats the best air riffle you can get for around $150?

i love the radio station your allways tuned into. haha oldies are the besties!

sheeesh if thats their chapel services, then their small bible groups are the size of my church haha!

fuck the cat muffelr and get a dual port one :D

hey bro can you tell me what the part number is for the zama carb. whats the zama carb model name?

ok hang on a sec, you didnt show spikes when you said spike boots hurt the tree. you showed baumvelo rings, and as a matter of fact, the platforms cause more damage to the stem then the rings do.

:D you guys need a record deal! this is amazing stuff! god bless you

what song was that?

@vedderfan94 :042 theres your tits

good to see someone wearing proper PPE in hawaii :)

hey if you guys want an experienced climber for your tree trimming please contact me. im available full time. i got all my own gear and chainsaws, do spikless palms, pruning, removals. i have alot of connections to the ISA and th arborist community who can put in some good recommendations for me....

13 people are patriots fans

19 people are patriots fans

husqy rules!

holy shit that things a beast!

cane you make me one that will work on a 394?

no compression = fried piston.

hahahahah that was hillarious!

15:15 was brutal haha.

or you can dremel out the hole on the factory port. when you take off deflector, you will see a round hole under it on the muffler. take a carbide dremel bit and widen that hole to the size of the outer square edges. then place the stock deflector back on. violla! dual porting in one hole

how much?

i hate myrtles. freaking every one i have seen has been topped.

there is no way that saw is stock.

that looked a little painful lol. verry difficult dead tree to work with, not alof of sound rigging spots and have to rig from a near by tree. thats a bummer. great job!

climbing line is slack? not good man keep that line taught or if you slip you will fall rather then swing. you dont wanna shock load your climbing line.