madaboutpix's channel

MACHINE SHOP TIPS #69 Atlas Lathe Milling Attachment Part 2 of 3 tubalcain

MACHINE SHOP TIPS #68 Atlas Lathe Milling Attachment Part 1 of 3 tubalcain

This is one way to cut an internal keyway with a lathe. This is a good option if you need to make an internal keyway but do not have a broach set....

Cutting an internal radius on a conventional center lathe

Home made ball turning attachment for a CZ300/1 metal lathe.

A small variation on a good idea from Tubalcain

The engine actually runs at 1540 for a second or two. I still have lots of work to do untill this runs as desired (1600-2000 rpms), but it has come...

Grinding rest attachment to allow you to hold correct relief angles on lathe tools while sharpening. I doubt that this is an original idea but I ha...

This is part 2 of a 2 part lesson. Tubalcain discusses the SINE BAR and shows some sample uses.

lanjutannya...

This is part 1 of a 2 part lesson. Tubalcain discusses the SINE BAR.

Part 6 of 6. Tubalcain demonstrates the use & care of bandsaw blades.

This is part 2 of a 2 part series on cutting an external acme thread on the Clausing lathe.

Part 3 of 3. Tubalcain shows how to machine a brass bearing on the Clausing lathe.

Tubalcain shows how to measure male & female dovetails on the Atlas lathe.

Tubalcain shows how to accurately layout & ream holes by 3 different methods. part 2 of 2

A two part series on holding the work in the Bridgeport mill.

Fox News Reporter- Uncrossed Legs WOW! Fox News Reporter- Uncrossed Legs WOW! Fox News Reporter- Uncrossed Legs WOW! Fox News Reporter- Uncrossed...

This is the engine I have been building since Metal Casting at Home video part 10. Ready for painting and mounting on hardwood base.

Making a cylinder head for a single cylinder hit and miss engine.

Core making moulding casting and machining operations.

The engine is an Olds Gear...

I have DRO for my mill for the X and Y direction. After awhile, I decided I needed to have a read out for the Z direction. I needed to make a bra...

Tubalcain shows how to machine a #2 Morse taper (both internal & external) on the 12" Atlas/Craftsman lathe using a homemade taper attachment. par...

clip from a movie

DOWNLOAD ALL PICTURES AT:

http://www.bigtitsdatabase....

Robin not wearing a undershirt, her beautiful boobs in all their glory. Also a very nice shot of Robin's booty.

Giada De Laurentiis - Jiggly Boobs

This video tutorial shows the method used to set the compound at the proper angle to remove ten thousandths of an inch from the diameter of a part....

Part 3 of 3 on machining a simple plumb bob on the Clausing Lathe. Includes taper turning by the compound rest method.

Part 2 of 3 on machining a simple plumb bob on the Clausing Lathe. Includes taper turning by the compound rest method.

MACHINE SHOP TIPS #70 Atlas Lathe Milling Attachment Part 3 of 3 tubalcain

Tubalcain shows how to turn a V-Pulley on the Clausing lathe.

Part 3 of 3.

SUBSCRIBE TO MY CHANNEL!

Tubalcain shows how to accurately layout & ream holes by 3 different methods. part 1 of 2

Here are 5 examples of oscillating steam engines.

Tubalcain demonstrates hole threading on the WALKER TURNER DRILL PRESS using a Procunier tapping Head.

Two methods of aligning the headstock center with the tailstock center. AKA--how to turn stock between centers WITHOUT a taper.