luckduckybillyboy's channel
Loading...
27
subscribers
31,158
video views
Uploaded videos
1-10 of 20-
New aluminum gantry on Joe's 4x4
luckduckybillyboy
1,390 views
Video of first moves with R&P drives and Hiwin Linear slide upgrade on my Joe's 4x4 hybrid router. I have the wire management left to complete. Running at 800ipm
-
KR33 Z slide
luckduckybillyboy
197 views
New Z axis slide for my Joe's Hybrid 4x4. Using a KR33 slide with a 6mm lead ball screw. running at 150ipm to 250ipm with the acceleration maxed out. Using a Xylotex 267 o...
-
Hunter Little Star #2
luckduckybillyboy
47 views
-
Hunter vs. The BigEasy
luckduckybillyboy
19 views
-
Hunter skiing on Little Star 7/4/2009
luckduckybillyboy
21 views
-
Edelweiss on the cow bells by the Jonny Wagner Band - Carlin Lake Lodge - Presque Isle, WI
luckduckybillyboy
968 views
Edelweiss on the cow bells by the Jonny Wagner Band - Carlin Lake Lodge - Presque Isle, WI from the 2009 Oktoberfest in August.
http://thejohnnywagnerband.com/
http://www....
-
guitar neck dxf to vectric closed shape
luckduckybillyboy
643 views
converting a guitar neck dxf into a closed shape
-
Aspire - Offset vs. X raster
luckduckybillyboy
1,028 views
Test of Aspire using a offset machining stratgey vs. an x raster. X raster is the winner!
-
BearBoard Good
luckduckybillyboy
693 views
3x20 cribbage board modeled in Aspire. Roughed with a 1/4" ballnose at 240ipm, finish with a 1/4" ballnose at 220 ipm. Drilled holes with a 1/8" DRILL at a 50ipm plunge. Cu...
-
Cribbage Board on 4x4 - OOOOPS!!!
luckduckybillyboy
3,464 views
13x20 cribbage board modeled in Aspire. Roughed with a 1/4" ballnose at 240ipm, finish with a 1/16" ballnose at 220 ipm. Drilled holes with a 1/8" DRILL at a 50ipm plunge...
Advertisement
About luckduckybillyboy's channel
more
less
Play all(20)