kwdaye's channel

This is the finished engine. It runs very well.

Here is my second test that I did to see if my burner assembly would function in the vertical orientation (plans available on ebay). I was very sa...

Stirling Engine

Construction details:

http://docs.google.com/Doc?...

Music from:

http://en.wikipedia.org/wik...

Single cylinder rhombic drive engine, atmospheric working pressure. Stroke 150mm bore 70mm. Heater multi stainless steel tubing. Cooler multi micro...

Babington style burner waste oil heater

Stirling Hot Air Engine - These are really cool engines. My father found this engine at an estate sale for $10. It's a plans built engine/fan. P...

The basics of oil burner service.

Part 1

This video is not intended to diagnose or troubleshoot any specific model of furnace. Consult your local...

After many question on how the burner works i did a short video on its construction and the parts in it and where i got the parts form

I hope its ...

Babington Ball style burner. I used a 3/8 flare nut with the end turned round and polished. a single .0100 hole drilled in the end. Nozzle assembly...

First run of my Babington Ball Burner. My plans are to incorporate the controls from a Becket oil gun and the boiler it was installed in to make t...

The evaporator oil burner for my foundry

This is a very small and also very quiet air compressor that I made for my Babington waste oil burner. It has a air pressure switch and a air regu...

do you know how a boiler operate? it's hot same you, let cool it before it overheats, hihi. how attractive you are!

I have been working on this project for quite some time now. I have had varoius problems, like with my welding not being good enough. I will add mo...

This is a Babington burner that I built a couples of years ago. It has oil preheated to 170-180 derees flowing over a bullett shapped body that ha...

Waste crankcase oil @ 140 degrees. 40 Psi of air. Working on the automation controls soon to come.

wvo burner

Learn how to store food in a mylar bag for long term/emergency. Step by step Beans rice flour dried eggs bisquick dry cheese. Have peace of mind.

first field test - burned one quart of oil in one hour to achieve exterior surface temp on 3/8" thick steel of 250 degrees. Will need to burn app...

Roger Sanders design model waste oil burner / heater.

Four-way switches are used any time when more than two switches are needed to control a light. This presentation shows the internal workings of the...

This is a short video that was created in response to a request on how text shadows can be implemented in OpenOffice.

http://www.witts.ws/atta

To learn more, go to "Advanced Technology Teaching Archives" Page http://www.witts.ws

http://www.witts.ws - Full Demo of the 2.3kW demonstration of the 40kW WITTS Fuelless Generator. This device, once started, requires no input of fu...

[BE SURE TO SUBSCRIBE!] See also: http://www.SnowLabs.net.

Also explained more here:

http://peswiki.com/index.ph...

Part 1: http://...

I moved the coil to the n45 neodymium magnets and changed the circuit to feed the coil from the cap & the battery.