ktservicescorp's channel
Loading...
1,364
subscribers
1,127,882
video views
Uploaded videos
1-10 of 33-
Feedback circuit to coil
ktservicescorp
17,867 views
I moved the coil to the n45 neodymium magnets and changed the circuit to feed the coil from the cap & the battery.
-
True RMS analog amp meter
ktservicescorp
10,559 views
Sorry about the video quality and the gradient on the amp meter. I have just ordered another amp meter which will show the needle moving more i.e 2amp meter.
-
Help Wanted (voluntary of course lol)
ktservicescorp
9,030 views
I need help turning this induction motor into a PMM/ALT. Duh whadoIdo :) I just know there are smartypants out there that know or can lead me in the right direction. GRACIO...
-
coil winder
ktservicescorp
31,096 views
Make your own alternator coil winder
-
Circuit, I hope I am not boring you :)
ktservicescorp
48,631 views
Description of the circuit to create the results I have posted. If you are wanting to build an alternator I used 24gauge wire wrapped 70times and made the core 1/8 of an in...
-
Its time to button it up.
ktservicescorp
9,626 views
You will see the readings I got off of 3 different sources from the simple pulse motor.
Input(pulsed) 12.19v * .057a = .7watts
Output 1(alternator):
8.3v * .100a = .83w...
-
Kiss my *@#%!
ktservicescorp
25,910 views
What I am going to show you is the watts being produced off of the 26gauge coil winding. The current is produce by a collapse of the magnetic field around the coil. SETUP: ...
-
MUST SEE!!!!
ktservicescorp
209,285 views
OK...this is VERY exciting stuff here. I finished my alternator for my pulse motor. You will see that the pulse motor is running like crap because of the additional vibrati...
-
Moving forward with the Resin
ktservicescorp
68,388 views
I encased the magnets and coil to the resin. It only took 2 hours to set. I found other resin at lowes, it flows MUCH better than the jelly stuff at autozone. And Elmers Gl...
-
Update on the pulse motor alternator
ktservicescorp
23,400 views
6 pole evenly spaced on magnets and coils. I rewound the coils I had to create more surface area on the windings. I can't wait to get it all together.
Advertisement
Play all(33)