jdcncsolutions's channel
Loading...
12
subscribers
16,746
video views
Uploaded videos
1-10 of 12-
CNC flood coolant enclosure: Coolant filter initial testing
jdcncsolutions
1,052 views
This video is of a custom coolant filter for the flood coolant enclosure project that I am working on. It seems as though it should do the job well, but I will have to wai...
-
Sieg X2 CNC conversion new features
jdcncsolutions
2,376 views
Cutting a new z-axis mount that will have a mounting surface for airline and coolant fixtures. One step closer to a flood coolant enclosure.
1/2 HSS end mill, 0.075 depth...
-
Sieg X2 CNC conversion 3-axis test engraving
jdcncsolutions
565 views
Testing the 3-axis conversion by engraving in oak.
This video was taken in May 2008.
For more information and photos of this project, visit www.jdcncsolutions.com.
-
Sieg X2 CNC conversion 3-axis test cuts
jdcncsolutions
840 views
Testing the 3-axis conversion by cutting a circular pocket in oak.
1/2 HSS end mill, 20 IPM, 2500 RPM, climb milling
This video was taken in May 2008.
For more infor...
-
Sieg X2 CNC conversion z-axis tests
jdcncsolutions
944 views
Testing the recently finished z-axis conversion. After some adjusting, I was able to maintain a rapid rate of 120 IPM with no loss of steps using a 282 oz-in stepper motor...
-
Sieg X2 CNC conversion machining bearing bracket
jdcncsolutions
872 views
Cutting the profile of a bearing bracket for a go kart rear axle.
1/2 HSS end mill, 10 IPM, 2500 RPM, climb milling
This video was taken in May 2008.
For more information...
-
Sieg X2 CNC conversion machining z-axis bracket
jdcncsolutions
4,047 views
Cutting the profile of a bracket that connects the z-axis assembly to the milling machine. This was also the first time using climb milling on a metal part. The part is f...
-
Sieg X2 CNC conversion machining nema 23 bracket
jdcncsolutions
1,923 views
Cutting a circular pocket in aluminum to allow clearance for a nema 23 motor. The part is for the z-axis ball screw conversion.
1/2 HSS end mill, 8 IPM, 2500 RPM, convent...
-
Sieg X2 CNC conversion machining aluminum test 2
jdcncsolutions
2,085 views
This is the second video for my aluminum cutting tests. The feed rate and spindle RPM were increased with good results. The part is for the z-axis ball screw conversion.
...
-
Sieg X2 CNC conversion machining aluminum test 1
jdcncsolutions
563 views
One of the first aluminum cuts while under CNC control. The part is for the z-axis ball screw mount.
3/8 HSS end mill, 3 IPM (slow), 1500 RPM, conventional milling
This ...
Advertisement
Play all(12)