ivanov3000mltk's channel
Loading...
-
ivanov3000mltk
liked
4 months ago
RoboCNC Old : This Video has been revised & moved
This Video has been revised & moved to the new RoboCNCnl Channel.
Channel link : http://www.youtube.com/user...
Video link : http://www.you...
-
ivanov3000mltk
subscribed to boochieboy814
5 months ago
-
ivanov3000mltk
liked
6 months ago
Pushup Board and XerStrap Workout, Manhattan Street Workout
Manhattan Street workout timed with the cross walk Light. 21 cycles, with a pushup board over/under ladder down from 14.
-
ivanov3000mltk
subscribed to LeftHandedDudeBG
6 months ago
-
ivanov3000mltk
subscribed to nickrendo
6 months ago
-
ivanov3000mltk
liked
6 months ago
simple homemade propane burner
This is a simple homemade propane burner that i built for a knife making forge.
-
ivanov3000mltk
liked
7 months ago
How to build a CNC router
This is how i built my CNC router for wood routing and plexi routing, the CNC router is made of MDF and its a smal hobby machine.
-
Pen shaking contraption
http://woodgears.ca/gear/cy...
A hand-cranked wooden geared centrifuge for getting the ink flowing again in pens and markers through the us...
-
-
ivanov3000mltk
subscribed to etang9
8 months ago
-
ivanov3000mltk
liked
8 months ago
My Homemade Convertible Crossbow / My Homemade Pistol Crossbow 2
Recently, I decided to make a full scale crossbow but I had 2 problems to solve. First, I was short on material and second, I had little space to k...
-
ivanov3000mltk
commented
8 months ago
home foundry build
Website http://theredneckchannel.yo...
better look at the foundry if u need more info on how to build a foundry i would be glad to take th...
Good job! one question - for what you made a lock on upper side of furnace? Is it fo safety? Is there heat isolator in furnace, and from what it is made if it is?
-
ivanov3000mltk
commented
8 months ago
Good job! one question - for what you made a lock on upper side of furnace? Is it fo safety?
-
ivanov3000mltk
liked
8 months ago
-
-
ivanov3000mltk
commented
8 months ago
Cylinder head melted in mega crusible.wmv
This was a bit of an experement, I was finding it very difficult to
break up aluminium cylinder heads from motor cars
I use these as they have th...
Very good video!!! It is very good idea to dry pieces of scrap before dropping into liquid Al. One advice: your giant crucible has thin sides and bottom (?) so it can suddenly burned in the bottom side. Please be carefull, care about your naked legs.
-
ivanov3000mltk
liked
8 months ago
mega melting container
Website http://theredneckchannel.yo...
The Crucible was built from a old air tank it 14" 7/8 tall and about 6" around or so well I hope th...
-
Metal Casting at Home Part 22 Flywheel Pattern Making & Casting.
Here I show the complete pattern making and casting of a 12 1/16" flywheel.
Although mainly about pattern making I have also shown the casting so t...
-
-
ivanov3000mltk
commented
8 months ago
home made Electric foundry for Aluminium
It is my second edition of homemade electric foundry for aluminium. This foundry has 2000 Watt electric power and need electric temperature regulat...
@justmekkb Hi! "loose your finger prints " great deal !!!!! :))
-
ivanov3000mltk
commented
8 months ago
home made Electric foundry for Aluminium
It is my second edition of homemade electric foundry for aluminium. This foundry has 2000 Watt electric power and need electric temperature regulat...
@Emaniac69 Hi! 1) As I know, thin pieses of scrap (and cans too) is not very sutable raw produce due to oxygenated layer over Al. Bulk pieses is better.
2) heater was burned. See explanation below video and answers to comments.
-
ivanov3000mltk
commented
9 months ago
home made Electric foundry for Aluminium
It is my second edition of homemade electric foundry for aluminium. This foundry has 2000 Watt electric power and need electric temperature regulat...
@c0ldelement please, use search string "foamed concrete" and "foam concrete" on ytube. I can't add any link here.
-
-
ivanov3000mltk
subscribed to hightechstuff2
9 months ago
-
ivanov3000mltk
commented
9 months ago
My diy spot welder!
I build this thing just from scrap I happened to see around the house
Nice job. Good idea to use small drill press for welder press. One mention - as I know in industrial spot welding first applied pressure to electrodes and second - high current. When welding finished - wise wersa. Can this have any sense for your job?
-
ivanov3000mltk
favorited
9 months ago
-
ivanov3000mltk
liked
9 months ago
-
-
ivanov3000mltk
subscribed to scottysavage
9 months ago
-
ivanov3000mltk
liked
9 months ago
How to build a Babington Burner
I built this burner after some research on the net and even more observing of other burners on YouTube.
-
ivanov3000mltk
commented
11 months ago
Machining the Model Stickney Engine with Lathe and Mill
How I machined the casting I made. This is a large casting for my machines so some unusual set ups were used. You can see the casting being made in...
Very nice video! Thanks for your efforts.
-
ivanov3000mltk
liked
11 months ago
-
-
ivanov3000mltk
liked
11 months ago
Home Built Compact Benchtop Power Hacksaw Cutting Steel
Home made power hacksaw .Great addition to any workshop.
I have plans for this one.
-
Metal Casting at Home Part 21 Core & Mould Making Casting & Machining
Making a cylinder head for a single cylinder hit and miss engine.
Core making moulding casting and machining operations.
The engine is an Olds Gear...
-
-
ivanov3000mltk
commented
11 months ago
axolotl is eating beef liver
Out axolotl is eating small pieses of beef liver. It lives in new absolutely empty aquarium two days. It is good time to film him.
@Capwonder Hi! Unfortunetly it is not a chiller. Chillers in Russia a expensiv. I intended to make homemade chiller with Peltier elements bought on eBay... But axolotl died from disease. Wery sad story :(
-
axolotl is eating beef liver
Out axolotl is eating small pieses of beef liver. It lives in new absolutely empty aquarium two days. It is good time to film him.
@XzozoX123 Hi. It was raw liver beef. I think it is not useful for water cleanness, but if make all with care it will be safely.
-
Homemade Aluminum Foundry DIY Best on YouTube
Aluminum foundry BEST ON YouTube diy
@aharonstube Hi! The best video, I agree :))) I wish you to continue your experiments. Be carefull when pouring liquid Al !!! It is not any joke.
-
-
ivanov3000mltk
favorited
1 year ago
Gilligan's CO2 Laser
Gilligan could have built one of these. Well, maybe with the professor's help. He also would have needed a generator, HV transformer, a vacuum pump...
-
ivanov3000mltk
commented
1 year ago
Homebuilt Ruby Laser
I made some significant improvements to my ruby laser: now it burns holes through steel razor blades and makes a plume of fire when striking target...
Hi! Exellent job. Can you explain some tips: Is it possible to use homemade flat semitransparent silver mirror and total reflecting one instead of specific dielectric laser mirror? And if you say yes - can them be used in Nd:YAG infrared laser? Is it possible to adjust optic resonator with common...
About ivanov3000mltk's channel
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
типа везде в итернете соду и соль кладут для флюса
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
@UzumakiProsuto No. pan is made from thin steel with thick Al bottom and another thin steel disk. When I pour hot Al into pan Al bottom have melt. It looks like pan leaks.
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
@JaiacosM I do not know. But as I know borax is used to dissolve oxidised layer on metals. I doubt NaBO3 is able to react with Al2O3 due to it chemical resistance. But who know... Try.
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
@phantasm091 Hi! As I know the best al alloy for the bells is duralumin, but it is not the best for casting. May be it simple formes like bells it will be casted rather good. I cast Al from cars engine heads and cast duralumin - Al alloy from Al tubes and angle bars. In simple formes it bouth ca...
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
@ericlepiq
Is it significant? Do you like tea? Coffee? Where does it made? Where does it grow? :)
Melting aluminium at homemade easy foundry furnace and crucible
Second video, step by step detailed description of my foundry in propane furnace, homemade steel crucible.
69,139 views
ivanov3000mltk said:
@SameOldRoper No.
+ View allshow less