imikewillrockyou's channel
Loading...
Uploaded videos
1-10 of 51-
Update - Plus Emergency Lighting Trick!
imikewillrockyou
5,251 views
Large Turbine is a bust. Going to focus on scaling up the smaller turbine which is already a good design. Also, I have a neat little emergency lighting trick I'd like to pa...
-
New Wind Turbine Update - Performed poorly in low wind.
imikewillrockyou
4,770 views
Normally, I have plenty of wind this time of year but not this year. Not hardly even a breeze. But I'm not satisfied with the turbines performance in low wind. Working on a...
-
Update! Large Homemade Wing Lift VAWT Coming this Fall
imikewillrockyou
4,839 views
Just want to let everyone know my next project, a much larger VAWT, is coming soon. So please subscribe and stay tuned. Thanks, Mike
-
Building a Wind Turbine (46 of 46) Finishing Up
imikewillrockyou
11,158 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Finishing Up. At this point your turbine is built and you need to consider how you are going to coat and wea...
-
Building a Wind Turbine (45 of 46) Set Carriage screws into Lid
imikewillrockyou
20,182 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Set Carriage Screws into Lid. After this step the turbine is build and just needs to be weather treated to liv...
-
44 Open holes on mounting ring with letter "i" drill
imikewillrockyou
5,472 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Open holes on mounting ring with letter "i" drill. Not the lid just the mounting ring.
-
Building a Wind Turbine (43 of 46) Test assemble and drill and match lid.
imikewillrockyou
15,625 views
Test assemble and drill and match lid.
-
Building a Wind Turbine (42 of 46) Mark and Center Punch 8 Places on Lid.
imikewillrockyou
2,958 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Mark and Center Punch 8 Places on Lid
-
Building a Wind Turbine (41 of 46) Press fit bronze bearing into lid
imikewillrockyou
2,927 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Press fit bronze bearing into lid. If you blew out the hole on your lid you likely could just epoxy the bronze...
-
Building a Wind Turbine (40 of 46) Assemble 5/16" bolt on top of turbine.MP4
imikewillrockyou
2,874 views
See turbine here: http://www.youtube.com/watch?v=8MQaT9EbMDQ
Assemble 5/16th" bolt on top of turbine. IMPORTANT: make sure the bolt is square to the top of the rotor. You ...
About imikewillrockyou's channel
My goal is to share useful ideas in the area of alternative energy and related projects that might make our world a better place to live.
Unless otherwise specified all designs may be freely used for non-commercial use, such as making your own personal wind turbine or other projects posted at this channel. Project designs may also be freely used by charitable non-profit organizations. Note: all videos on this channel are Copyright © 2010 M. A. Weber. All rights reserved. All the intellectual property also belongs to myself.
My goal is to share useful ideas in the area of alternative energy and related projects that might make our world a better place to live.
Unless otherwise specified all designs may be freely used for non-commercial use, such as making your own ...
Play all(51)