www-ideegeniali-it
Loading...
246
subscribers
939,251
video views
Uploaded videos
1-10 of 40-
K.I.T.T. Upper consolle 10 keys configuration
ideegeniali
53 views
See how NOT to mess with lots of wires to configure red led behaviour on K.I.T.T. upper consolle when solder jumpers are provided.
In questo video viene mostrato come NO...
-
KITT Voicebox External Count Down Lamp Drive
ideegeniali
473 views
Ideegeniali voicebox lights count-down lamps directly, via the External Lamp Drive function, available on screw drivers on the left.
Up to 7 external lamps can be direct...
-
KITT Voicebox - Direct PANP keys drive
ideegeniali
1,230 views
KITT Voicebox direct-connect with momentary pushbuttons to Panp Keys. Voicebox plays a DTMF tone and lights up the correct indicator, wich stays lit until next PANP key ope...
-
Show-accurate red led behaviours on KITT Switchpod
ideegeniali
393 views
KITT Switchpod Leds can be configured to various functions. To get a show-accurate switchpod, configure green and yellow for always on, and red for lighted-while-pushed beh...
-
How to configure jumpers on ideegeniali KITT Switchpod
ideegeniali
429 views
A solder jumper can be closed or opened with a soldering iron. Here a switchpod is configured for 100% show-accurate push-to-light operations via solder jumpering. This met...
-
KITT 10 keys upper consolle, narrow - Push to switch off
ideegeniali
171 views
The 10 keys kitt upper consolle is configured for push-to-switch-off operations. Leds are normally lit, when you push the button, they switch off. This is just one of the l...
-
KITT 4 keys upper consolle, wide - Push to Off function
ideegeniali
134 views
The 4 keys kitt upper consolle is configured for push-to-switch-off operations. Leds are normally lit, when you push the button, they switch off. This is just one of the le...
-
KITT 4 keys upper consolle, narrow - Always On Function
ideegeniali
141 views
The 4 keys kitt upper consolle is configured for leds always lit operations. Leds are always lit, whether you push the buttons or not. This is just one of the led operating...
-
Mach3 cnc software bug and workaround - Regen Toolpath
ideegeniali
1,391 views
Mach3 is sometimes defective, that a just loaded .tap gcode file won't show on toolpath. In this case, just hit the "regen toolpath" to get rid of the (slight) bug.
Mach3 ...
-
Cobra cnc stepper motor driver board enclosure
ideegeniali
1,283 views
Inserting cobra stepper driver board into its enclosure and operate.
Cobra enclosure protects board from debris, accidental falls, and such.
Inserimento della scheda co...
Advertisement
Play all(40)