Successfully removed.
Sorry, an error occurred.
|
hotwill100 liked a video
(6 days ago)
Here are two more airsoft creations that can be made out of common materials.
If you missed my previous video in which I first showed how to make an...
more
Here are two more airsoft creations that can be made out of common materials.
If you missed my previous video in which I first showed how to make an airsoft machine gun from a soda bottle, it can be found here: http://youtu.be/r_8wRpgvhyg
less
|
|
| |
|
|
hotwill100 favorited a video
(6 days ago)
If you like this video please share it with your friends!
This is a type of cloud airsoft gun - named so because of how the pellets are blown around...
more
If you like this video please share it with your friends!
This is a type of cloud airsoft gun - named so because of how the pellets are blown around the reservoir before being fired out the barrel. Since there is nothing mechanical to get in the way of the workings of this gun the rate of fire is extremely high, an estimated 50 rounds per second. It would make a great airsoft turret to be mounted on the defensive wall of a home base.
The price of materials is just over $50 assuming the builder already has PVC primer and cement.
Parts List:
-------------------------------------------------------------------------
4' of 2" pressure rated sch40 PVC
4' of 1.25" pressure rated sch40 PVC
2" end caps x2
2" 90 degree elbow
2" 90 degree street elbow
1.25" end caps x3
1.25" couplings x2
1.25"x0.5" threaded reducer
0.5" threaded plug
6mm ID x 3' aluminum tube
Rubber tire valve
Air compressor blower valve w/ threaded ends
Close brass pipe nipple - to fit blower valve
Hose fittings - to fit blower valve - x2
1' air compressor hose - matched to hose fittings
Hose straps - for compressor hose - x2
Large hose straps
1" foam pipe insulation - or a wood block fitted for chamber support
less
|
|
| |
|
|
hotwill100 liked a video
(6 days ago)
If you like this video please share it with your friends!
This is a type of cloud airsoft gun - named so because of how the pellets are blown around...
more
If you like this video please share it with your friends!
This is a type of cloud airsoft gun - named so because of how the pellets are blown around the reservoir before being fired out the barrel. Since there is nothing mechanical to get in the way of the workings of this gun the rate of fire is extremely high, an estimated 50 rounds per second. It would make a great airsoft turret to be mounted on the defensive wall of a home base.
The price of materials is just over $50 assuming the builder already has PVC primer and cement.
Parts List:
-------------------------------------------------------------------------
4' of 2" pressure rated sch40 PVC
4' of 1.25" pressure rated sch40 PVC
2" end caps x2
2" 90 degree elbow
2" 90 degree street elbow
1.25" end caps x3
1.25" couplings x2
1.25"x0.5" threaded reducer
0.5" threaded plug
6mm ID x 3' aluminum tube
Rubber tire valve
Air compressor blower valve w/ threaded ends
Close brass pipe nipple - to fit blower valve
Hose fittings - to fit blower valve - x2
1' air compressor hose - matched to hose fittings
Hose straps - for compressor hose - x2
Large hose straps
1" foam pipe insulation - or a wood block fitted for chamber support
less
|
|
| |
|
|
This video demonstrates how to fire a rocket under the power of a flammable aerosol. Hairspray or a flammable spray deodorant are the fuels of choi...
more
This video demonstrates how to fire a rocket under the power of a flammable aerosol. Hairspray or a flammable spray deodorant are the fuels of choice. The total cost of this project assuming the tools needed are already available is about $25. For that price you can make 4 rockets for the launcher, as the foam sleeping pad that they are made of is large enough to make multiples.
Parts & Tools:
1. 18" x 3" Pressure Rated PVC Pipe
2. 3" Pressure Rated PVC End Cap
3. Piezoelectric BBQ Igniter or Flint & Steel Lantern Striker (Available at hardware or sporting goods stores)
4. 2 Self Tapping Screws if using a BBQ Ignitor
5. Foam Sleeping Pad
6. 2 Liter Soda Bottle
7. Duct or Packaging Tape
8. Hot Glue
9. Drill & Bits
10. PVC Primer & Cement
less
|
|
| |
|
|
hotwill100 liked a video
(6 days ago)
Here is how to turn a BBQ lighter into a mini cannon sized for airsoft pellets. Be sure to leave me a comment, rate, and subscribe! If you really l...
more
Here is how to turn a BBQ lighter into a mini cannon sized for airsoft pellets. Be sure to leave me a comment, rate, and subscribe! If you really like my videos, share them with your friends on facebook!
Vote for me on King of the Web here: http://kingofweb.com/users/2103894296
The exact model lighter used in this video is a 'grill zone flexable lighter'. Another lighter that will work well is the Scripto Aim 'N Flame II Lighter, which is carried by Home Depot.
Tags:
how to make a paper gun that shoots easy homemade weapons tutorial In just a couple easy steps, you can make any standard lighter do amazing things
less
|
|
