Kanal von habbobaby1
Loading...
10
subscribers
111,414
video views
Uploaded videos
1-10 of 52-
Ansys CFX: Flow in a Process Injection Mixing Pipe (tutorial)
habbobaby1
103 views
The geometry for this example consists of a circular pipe of diameter 1.0 m with a 90° bend, and a smaller pipe of diameter 0.3 m which joins with the main pipe at an obliq...
-
Ansys CFX: Flow in an Axial Rotor/Stator (tutorial)
habbobaby1
142 views
In this example, the rotor rotates about the Z-axis at 523.6 rad/s while the stator is stationary. Periodic boundaries are used to allow only a small section of the full ge...
-
Ansys CFX: Flow in a Catalytic Converter (tutorial)
habbobaby1
242 views
In this tutorial, you will model a catalytic converter in order to determine the pressure drop and heat transfer through it when air enters the inlet at 25 m/s and 500 K, a...
-
Ansys CFX: Flow Through a Butterfly Valve (tutorial)
habbobaby1
168 views
Pumps and compressors are commonplace. An estimate of the pumping requirement can be calculated based on the height difference between source and destination and head loss ...
-
My bedroom analysed with CFD (ANSYS CFX)
habbobaby1
72 views
My first ever "project" :)
I set the following boundary conditions:
- Steady state analysis
- Heater: 70°C
- Windows: 8°C
- Wall facing outdoors: 15°C
- Rest: adiabatic
-
Ansys CFX: Free Surface Flow Over a Bump (tutorial)
habbobaby1
157 views
This tutorial demonstrates the simulation of a free surface flow. The geometry consists of a 2D channel in which the bottom of the channel is interrupted by a semicircular ...
-
Ansys CFX: Buoyant Flow in a Partitioned Cavity (tutorial)
habbobaby1
70 views
The goal of this tutorial is to model a buoyancy-driven flow which require the inclusion of gravitational effects.
The model is a 2D partitioned cavity containing air with...
-
Ansys CFX: Flow Around a Blunt Body (tutorial)
habbobaby1
400 views
In this tutorial, a generic vehicle body is placed into an oncoming side wind of 15 m/s. The turbulence will be set to Intensity and Length scale with a value of 0.05, whic...
-
Ansys CFX: Smoke emission from a Circular Vent (tutorial)
habbobaby1
63 views
In this example, a chimney stack releases smoke that is dispersed into the atmosphere with an oncoming side wind of 1 m/s. The turbulence will be set to intensity and lengt...
-
Ansys CFX: Temperature distribution in a Static Mixer (tutorial)
habbobaby1
97 views
Water enters through both pipes at the same rate but at different temperatures. The first entry is at a rate of 2 m/s and a temperature of 315 K and the second entry is at ...
Advertisement
About Kanal von habbobaby1
more
less
Play all(52)