gosub283's channel
Loading...
30
subscribers
113,846
video views
Uploaded videos
1-10 of 21-
LZ254 starter and dash lights
gosub283
17 views
Starter not engaging. Since fixed by replacing starter.
Red dash lights have no label. What do they mean ?
-
JD165-First Smoke
gosub283
79 views
JiangDong, air cooled, 4HP diesel engine. First run.
-
GM90 Powerplant walkaround
gosub283
279 views
Progress on the power system.
Just finished the exhaust and fuel systems.
Engine has 30 minutes run time at this point.
-
GM90 full load - crankcase vent.mpg
gosub283
183 views
Brief ramp up to full load (2.5 kw) during break-in.
Notice the blow-by from the crankcase breather.
(This can be expected until rings fully seat.)
-
R190 Generator Walk Around
gosub283
313 views
Changfa R190 with Voltmaster AB50, 4kw generator head.
HP : 7.5 @ 1800 rpm
Engine RPM: 1800
Gen RPM : 3600
-
R190-1100rpm-1kw load
gosub283
492 views
Modified the belt drive to give the proper generator speed when the engine is turning at 1100 rpm.
Generator is loaded to 1000 watts to simulate charging a battery bank (1...
-
R190 1800rpm muffler test
gosub283
491 views
R190 @ 1800 rpm with new tractor muffler installed.
Test 1 - Muffler and open pipe
Test 2 - Muffler and pipe extending outdoors
Test 3 - Temporary second muffler
-
WVO Processor version 2.0 test
gosub283
604 views
Reduced the size of my WVO processor to accommodate cubies up to 5 gallons (approx. 22 liters). The smaller batch size allows for approx. 35 passes through the centrifuge i...
-
First Smoke GM90
gosub283
595 views
First run after a tear down. GM90 Listeroid engine.
Running at 560 RPM
-
Changfa 195 - Slow Speed Project
gosub283
1,869 views
This is the completed project with the engine mounted on stationary feet.
The Changfa runs very smooth at 900 rpm and produces 2.5 kw with clear exhaust and 3kw with slight...
Advertisement
About gosub283's channel
more
less
Play all(21)