eDigitalDeals's channel
Loading...
59
subscribers
168,061
video views
Uploaded videos
1-10 of 64-
How to Change from the Default PAL to NTSC
eDigitalDeals
12 views
The DVR software's default video type is PAL, which is NOT the standard for North America. In order to recover from vertical lines or red blotches on the cameras, follow th...
-
IE Remote View on a D1-HC3 DVR: CIF Resolution @ 7.5fps
eDigitalDeals
17 views
Bicyclist gets stopped and searched by the police outside our front gate.
-
How to Limit the DVR's Number of Recording Days
eDigitalDeals
18 views
The default setting is Auto for infinite recording until your allocated hard drive reaches capacity, at which point the software will automatically recycle itself. Adjust t...
-
Difference Between a 3 Megapixel and 4CIF Analog Camera
eDigitalDeals
41 views
In this video we are remotely viewing a DVR that has both analog and megapixel cameras. The two cameras that we show you are analog and 3 Megapixels. You will clearly see t...
-
Local Recording on NVR Client: Normal and Motion Detection
eDigitalDeals
29 views
1) How to setup disk allocation to allocate part of your hard drive for NVR recording. 2) How to adjust settings in NVR Client to allow recording. 3) Normal recording prefe...
-
Set a Manual IP Address for a Vivotek Network Camera
eDigitalDeals
14 views
We highly recommend that you not use DHCP to configure IP cameras, but to rather set each IP camera with a manual IP address.
-
Add a Vivotek IP Camera to the eDigital Hybrid D1-HC DVR Server
eDigitalDeals
12 views
1) Download and install the Vivotek IW2 Software. 2) Configure each camera's IP address and motion detection settings in the Internet Explorer interface. 3) Add each camera...
-
How to add a User and Limit Permissions in eDigital Hybrid D1-HC DVR Server
eDigitalDeals
22 views
Ideal for adding users who should not have the ability to make DVR Server settings modifications, view recorded footage, or to limit a user from being able to view certain ...
-
How to Change your TeamViewer Port on a DVR or Web Server
eDigitalDeals
32 views
If you use port 80 for your DVR's remote HTTP or web port, you need to change the default TeamViewr port so that it does not conflict with port 80.
-
How to Configure a Vivotek IP Camera and Add it to the eDigital HC Hybrid NVR Client
eDigitalDeals
71 views
This tutorial shows how to download the Vivotek configuration software, and then how to configure the IP address settings for each Vivotek network camera, and then how to a...
Advertisement
Play all(64)