dougspair's channel

@sebasamy13 Sounds like you might have a double pole on-off switch, does it say 'load' at the two bottom screws, and 'line' at the top 2? If so, it won't be very usefull in this 3-4 way set-up.

Ok, so people understand this is a TATTOO, it is painfull, and stays there for about...forever.

@acronus Too bad it wasn't some 3 phase, at 480...

@RoberTastic Romex, usually 1 per hole, for EMT, it depends on size of EMT and sizes of wires. Best deal for information, buy the NEC book.

@jeffweissman Where are you located? Here in Calif, no wirenuts or splices allowed in the breaker panel box.

@dougspair Well, I understand that it takes a bit of effort to make, and post these videos. I look at youtube for information, and learning, but it seems there are many commenters that are actually just "Armchair Commandos" that see any comment or videos as a sort of invitation for a confrontatio...

Now he knows why the others weren't doing burn-outs?

From new to 'used' in 10 seconds.

I'm in Sacramento, Calif. We've had so many fires in the past due to aluminum wiring in trailers and modular homes, they now require copper. But commercial still allows aluminum, I do comm'l maint-elec/mech/welding and it's just not worth the savings for the aluminum (in my opinion, anyway).

My...

And then there's really scary. My last job, I was hired to do the maint-mech-welder-electrician at a 44,000 foot commercial building. A whole lot of this stuff on the 1,000 amp 480.

6 dry 480/208 trannys at 75-100 KVA. about 25 different 42 slot 480/208/120 panels. rubber SO cords with twist-lock...

@sparkyUonline Yes, I do commercial maint-elec/welding and such. I like Fluke and Greenlee. Not worth 'cheaping out' when you're in a 44,000 foot building with 1,000 amps of 480.

@voltagehz Ha, Yes...At my last job, I was elec/mech maint. I got to fix a whole lot of this kind of stuff, in the 44,000 foot building, 1,000 amps of 480 coming in.

A little knowledge can be worse than none, in this case.

Looks almost like my '46.

@cheeshdog yeah, you pull a knife (which is a fatal weapon) you get the lead injections.

Well, don't hold people hostage...

@BankaiIchigo12345 We was robbed.

@neoaikon I was thinking Prisoners get a free lunch?

So, you use big ass electric motor to run the small heater?

so, Wind moves magnets and coils? Don't they already have these up on big towers??

@onehundredvoices100 yes...Wow! Look at that...whoops, I don't know what happened.

Hombre poppo El Baloono

@LiamXaoh You got it!!

@AmuelSadams Yes, those are uaually cast iron, the magnets must be very weak to not be attracted to them? But the magnets can run the wheel from 4-5 " away?

@ShaturdDreemz Well yeah, back then, you just worked out, no breath wasted on small talk, or showing of your fancy workout clothes.. Rich and famous, or the poor boy from the restaurant dishwashing, all were the same in the gym. Even the big guys recalled when they were beginners, so everyone jus...

@douro20 Ok, thanks, I like to know what I'm talking about. Now, after your info, I see the exhaust appears to be on the bottom, and I see the spark plug. I might have figured this out after looking more closely at the in-out valve action in relation to the crank rotation.

Very nice video, thanks. Do you have to make the hinge pin? I've done a good deal of metal working, mostly flame cutting and welding, but I like to learn new things. I recently bought a #70 JHM anvil and am loking forward to hammering on it a bit.

I'm over 60 and have been playing with electrical stuff ( DC-AC, 3 phase) since I was about 4-5, I never get tired of it. Your videos are cool. I've only looked at a couple, but will inspect a few more tomorrow.And I agree,there are a lot of people posting and commenting here about the 'free powe...

Where are you located? I grew up in Santa Ana, Calif, (1950-60's) and went to Arrowhead for summer camp, also Big bear. I live in Sacramento now.

@ct92404 I agree!

@FANCYPANTSFREERIDE Well, they are attractive, right? But eventually you succumb to the repulsion and look elsewhere. At least this guy isn't claiming the free power deal?

@guitarguy123212 I've tried the stool standing deal, a sort of very fast gliding, 100% gravity powered, only goes about a foot though.

No V twin is complete without the belt drive...Awesome.

Are you running an oiling system? I see what looks like an oil pump at the rear of cam case. And a crankcase rotary breather?

@yottavideos Aqua Regia, contains some very nasty nitric acid, expensive stuff and a single drop will burn a big hole in you. Then you need a neutralizer, space to work, electricity.

so what are you going to use the zinc and copper for later?

@silvermediastudio Do you have any idea how many Microns? even at 2-3 microns, that's only 1/10th of a thousandth of an inch. Somewhere on youtube a professional Gold Recovery guy was mentioning that it would take around 2,200 pounds of just bare mother and RAM boards to get an ounce of gold. The...

@holowenko Yes, in this case, more like an induction coil.

Reminds me of that site "It's Real!"...where nothing is...

@1521joe Yah, Giff Dem to me, NOW!

Whooping them young dudes on the leg-press...awesome!!

@pepene93 yes, makes it hard to get across the intersection when you have the green light.

@socalpimp1974 A black one, right?

@AldoZuper I was thinking that, but declined to say so.

@OHBISX ..I'm thinking more of a Kuh- lunka' tick...Kuh-lunka tick...cool sound either way.

@GermanCarTestsFL I'm guessing that's the water pump to the left at the beginning of video? (20 seconds)