doc4140's channel
Loading...
-
doc4140
favorited
5 days ago
blabe mcpx tips to make it fly better with less vibration.mp4
blade mcpx tips to make it fly better with less vibration
-
3gx Gyro Gain Verification - quick walk through
Guys using different radios, or different setups use this to verify your actually adjusting your gain on the 3gx and not just on your tx. You may ...
-
Setup on 3GX
3gx setup
-
-
doc4140
favorited
1 week ago
ALIGN 3Gx DIR Setup by Jeff Fassbinder
ALIGN 3GX SETUP ON TREX 600 EFL
JEFF FASSBINDER
-
Mozart Flute Concerto in D major, Mvmt 1, Allegro aperto
Emma Resmini (age 10) and Mariko Hiller (piano) perform at an April 10, 2011 benefit concert for the relief of Japanese tsunami victims.
-
How to Solder Bullet Connectors to Brushless Motors and ESC
How to Solder Bullet Connectors to Brushless Motors and ESC
-
3gx DIR setup - quick walk through
3gx DIR setup. This video does not include rudder/gyro setup or loading model specific with settings.
-
-
doc4140
favorited
2 weeks ago
T-Rex 550E 3GX my setup
kurzes video mit dem setup von meinem 550er t-rex
-
doc4140
favorited
2 weeks ago
Align Trex 550e 3g Build - Time Lapse with Tips
Long video but you can fast forward to specific pages...
Page 6 - Head Assembly: 0:35
Page 7 - Frame Assembly: 6:44
Page 8 - Add Servos: 12:53
Page...
-
Product Spotlight: Mean Well SE-1000-24 Power Supply
Today we're taking a closer look at the Mean Well SE-1000-24 Power Supply, as well as some of its optional accessories.
You can find the SE-1000-...
-
How to build the Trex 550E
A slide show of the building of the 550E, electronics and 3G set up coming soon.
-
Align Trex 550E V2 Frames Tail Case/Boom and Autorotation Unit
Align Trex 550E V2 Frames Tail Case/Boom, and Autorotation Unit. This build was done by Dino Spadacinni. All editing was done by Jeff Fassbinder.
-
-
doc4140
favorited
2 weeks ago
trex 550e 3gx time lapse build.
align trex 550e 3gx time lapse build. done with iPhone 4 with reel moments app and edited with final cut x.
-
Align Trex 550E V2 Building the Rotor Head, Swashplate, and Frames
Align Trex 550E V2 Building of the Rotor Head, Swashplate, and Frame assembly. Also shows part of the servo install.
Build by Dino Spadaccini
Video...
-
TIME-LAPSE BUILD - ALIGN T-REX 550E 3GX Flybarless R/C Helicopter
Well I built another smaller helicopter - it was a pleasure to build and I did it in about 8.275 hours all up over two nights. Setting up the 3GX w...
-
-
doc4140
favorited
2 weeks ago
3gx model selection/settings - quick walk through
3gx model selection and showing my software settings. This video does not show DIR or gyro setup.
-
Wave - Antonio Carlos Jobim with Herbie Hancock (Live)
from ANTONIO CARLOS JOBIM: ALL-STAR TRIBUTE DVD
-
doc4140
favorited
1 month ago
"Wave" by Antonio Carlos Jobim
Giles Barratt Guitar and Deborah Glenister on Flute in the Americano Jazz Caffe in SA1. Video by Amy Sinha, slides by Gary and Deborah Glenister an...
-
James Moody - Wave
From "Feelin' It Together" (1973)
James Moody - Flute, Alto & Tenor Saxophone
Kenny Barron - Piano, Electric Piano & Harpsichord
Larry Ridley - Ba...
-
Jazz Flute - Paul Desmond - Take 5
A challenging tune on several levels. Pesky fingering on the flute, but also difficult to get any cohesive phrasing going. I want to wish Happy Eas...
-
ALAN SZABO STICK MOVEMENTS MOD 2
ALAN SZABO STICK
-
-
doc4140
favorited
1 month ago
How to Select Rods for Arc Welding - Kevin Caron
From http://www.kevincaron.com - Artist Kevin Caron shows how to figure out which welding rod to use when using an arc welder (also known as a stic...
-
"Flash these Faces..."
A video that shows how I shoot candid streets portraits with a flash in Istanbul together with some guys from the Beirut Street Photographers (BSP)...
-
-
doc4140
favorited
1 month ago
Trex 600EFL 12s flybarless unboxing and finshed heli
in this video i show all my heli's plus it a trex 600efl un boxing video and finished heli
-
Donald BYRD "Flute blues" (1958)
From the album "Byrd in Paris". Recorded October 22, 1958, Olympia hall, Paris. Donald BYRD (tpt), Bobby JASPAR (T sax, flt), Walter DAVIS Jr (pno)...
-
Mig welding voltage and wire speed settings, how to mig weld.
http://www.learn-how-to-wel...
Your mig welding arc voltage and wire feed spee...
-
The Deluxe Road Bike
Preview of the Road Bike DVDs #1 & #2. This is not an easy project. However, this preview does give some good ideas on brazing, gas welding, and ...
-
-
doc4140
favorited
3 months ago
Making Copper Butterflies - 2nd Edition
This is a preview of the second edition of Making Copper Butterflies DVD - 2nd Edition. Butterflies have been a main bread and butter source of in...
-
Someone like you - Adele (Cover)
Hope you enjoy!
comment rate subscribe!
follow me on twitter @danilalalo
:)
-
hercules beetle Steel Art Productions scrap metal art
hercules beetle weighs about 2kg. We are always making new pieces and coming up with new ideas so once a piece is sold it is unlikely we will make ...
-
recycled metal sculpture
sculpture made from recycled metal by Australian artist Matt Drysdale
-
-
doc4140
favorited
4 months ago
Amweld Video Part 10
American Welding Distributors, amweld.com.au, henrob, dhc2000, dhc, 2000, Australia, welding, tig, torch, welders, solder
-
Amweld Video Part 2
American Welding Distributors, amweld.com.au, henrob, dhc2000, dhc, 2000, Australia, welding, tig, torch, welders, solder
-
Amweld Video Part 3
American Welding Distributors, amweld.com.au, henrob, dhc2000, dhc, 2000, Australia, welding, tig, torch, welders, solder
-
-
doc4140
favorited
4 months ago
Fusion welding using the Henrob 2000
Using the Henrob 2000 to fuse weld 12 gauge steel. First tack welding and then fusing the seam together resulting in a smooth weld that requires mi...
-
doc4140
liked
4 months ago
-
-
doc4140
favorited
4 months ago
3 Oxygen Acetylene Flames
The three flames I use in producing metal sculpture.
-
The Carbonizing Flame for Brazing
The neutral flame is the ideal flame for brazing and welding with the Oxygen Acetylene Torch. But, if the bronze rod is not flowing quite right, y...
-
Brazing Hints and Tips
How do you know when your metal is ready to accept the bronze? What to do it the metal is too hot. Smoothing out a rough braze.
-
Braze vs. Weld
More short videos at http://www.gsegmedia.com. A frequent question is what is the difference between brazing and welding. This short video demon...
-
-
doc4140
favorited
4 months ago
Quick Oxy-Acetylene Welding Introduction
Introduction to Oxy-Fuel welding.
About doc4140's channel