daintegman's channel

HOW TO....by Autoscope

I made this video so that it could be used as a supplement while following an online guide such as this one

http://www.twinturbo.net/ni......

Check out our website http://www.hpheaven.com.au

Lyle Lemon's MR PSI personal best with 1731.7HP Dyno run at VIC Supercruz.

To download this clip ...

this was my 2nd full 1/4 nitrous pass, and we got it on video thanks to russell. the 1st pass was a 9.4@142 but no video on that one :/

I've received the video from Totalcarconcept.com of the dynorun! The Switzer P800 kit turns the GT-R in to a 800 HP monster. With a few PSi more bo...

Me messing around with my GoPro in the rain. Fixed the audio issue from other video.

A time lapsed video of a 300zx NA to Twin Turbo swap. Footage from roughly 20hrs. Some minor things were left out but you get the idea.

We are 655...

Playing in a parking lot. The car is MY2000 2.5RS with a version 6 STI RA drivetrain swap, 20G turbo, R180 rear end with the DCCD set to full open...

my sti swapped 2.5rs, I got bored and threw this togetger, more to come.

Was bored while camping so I decided to try this out.

Due to popular demand, the headlights were replaced with stock. Pics here:

http://img.photobucket.com/...

http://img.p...

Amazing how a 1 ton car can pull out a 3 ton 18 wheeler out of the snow in such conditions.

Type R on the dyno at the SPEEDFACTORY tent. Honda-Tech May 1st 2010

Turbo manufacturer Holset shows how a turbo works and gives some fault finding tips.

Very informative.

Ignition DVD takes a look at wastegates with GCG Turbo's. Internal, external how they work and all the parts involved.

This video shows that most diaphragm wastegates don't seal very well. The Synchronic wastegate is designed to seal in boost.

twin turbo integra 5 speed

Shooting my friend Czarnico Egana's 1991 "Clean as F*CK" Acura Integra DA on Wednesday September 08, 2010. Shots were taken at Ypao Beach Park, Tu...

My '95 Honda Accord Couple 2.0i LS on hydraulic suspension.

This is the second part of the boost leak testing series. In this video, several examples of possible leaks you might find are exhibited, as well ...

Setting base timing, fuel pressure and ISC motor using DSMlink v2. Getting the idle speed and baseline settings correct is crucial to achieving a ...

How to set idle stopper, TPS sensor, and throttle linkage. These are conditions that need to be set properly prior to adjusting your idle, fuel, t...