dagwood64's channel

Excellent vid Ali, thanks for sharing. Tell you wife we say hi, or at least I do, she does excellent work when she records for you. At least this time she go to relax, while the plane did the recording.

Use the Honda clone, on the rear, with the pillow blocks on the bottom for clearance and put your own touch to it.

I had the same thing happen to me, many times but it stopped after the divorce.

He did a BP spill in BP, for payback for what they did in Louisiana.mahahahah!

@Tmansgokarts Yeah... I know, I've been too cheep to buy a good camera. The one I have the quality sucks for youtube, so I'm gonna have to bite the bullet and invest in one. I do have a lot of great tips and builds I can share. I'm in the process of building tack system for a scooter to use in sn...

Even here in Maine, about 80% of the bikers will wave to use on scooters. The ones that don't seem to wave are the young ones on crotch-rockets.

Oh..... another thing Boogie, I know your girl friend won't go for it, but you should do a youtube wedding, I think that would be awesome.

Too bad your video camera doesn't have a plugin backup for power, then you could just plug it in out in the shop and not worry about the battery going dead on ya. my cheap China on has a plugin backup, but the quality sucks.

A dull blade might make a difference, but still I don't want to take a chance with a loose shirt sleeve. For a moment, I thought I was watching Mythbusters lol.

Stop it boogie.... It gets me all excited lol.

The Alienware is probably set up for gaming, so it has tons more of stuff to load than the Dell. My Alienware is at least 50 times better at gaming than my 7 yr old Dell, and my Dell boots up a lot faster than the Alienware. MY Dell will not handle a lot of the games I play, and the one it does p...

I don't know why you need 30 plants? I usually plant 6 plants, and get over 40quarts and still give a lot away.

I think that thing would be some scary if it went much faster, but what the heck, super her up and let her go.

Excellent job! The tip of your bar sounds dry, it needs a little grease. There will be a little pin hole on the tip of the bar, to the bearings, pump grease in until it come out and you will be all set. You probably new that. If you don't have a bare grease gun, they aren't that expensive.

I'm so sorry Dee, when it comes to animals my heart melts. I volunteer at our local animal shelter and there was this pug that came in, she was found in a dumpster inside a bag with no oxygen. Thank god someone found her before she died. Well she is about 9 yrs old with full blown lime disease a...

Not much for shelter, I believe they will use them for camouflage, to hide in or behind so they can ambush their prey. That's what I think anyways.

The camera man was the lifesaver, he grabbed the beer.

Awesome build, all you need to do is hook up and electric or battery operated drill, to speed the lift up.

I know I will still be breaking wind in the future.

There is some types of Bamboo, that will grow in the northern parts of the US, but read up on it if you plant any. Some types of Bamboo is very invasive, and extremely hard to get rid of.

At least your outdoors doing something. Most kids just stay inside and watch TV, computer or video games, heck, they don't even use their imaginations anymore.

Great work my friend, keep them coming.

I try to do this at least two to three weekends a year, with just my knife, flint and a change of clothes. It's fun for me anyways, just to get away from all the hubbub, of everyday life. Both of my daughters are all grown up, but I know that, if they were ever stranded in the woods, they could s...

Thanks for posting the FPV view. I didn't realize the video wasn't that good, but I still enjoyed it. I haven't flown RC in about 20yrs now, but my kids are all grown up, and I'm thinking of getting back into it. I just bought real flight to practice on, so I can get use to it again.

Thanks for p...

Nice flying, I just wished you would of done your video frames the other way around, so we could see the FPV video. Nice landings too, by the way. Thanks for sharing.

Pause at 1:01 at the lower left corner between the birch branches, looks like two eyes and nose ridge.

WOW!!! I can't tell for sure, but I believe you got pics of a baby BF. Great work keep them coming!

Just be careful, you know how any mom can be protective.

Peace

Nothing a little duct tape will fix, and be good as new.

What an awesome Idea! Just shows there is no end to an imagination.

I hope I can fine a good quality lathe in my price range soon. I have a 1969 Montgomery Wards Master Craft 9 1/2 X 30 lathe that was given to me, The headstock has a 5/8" unthreaded shaft with a reverse taper, so I don't think I can put a chuck on it. It's just like new, but I can only turn a few...

For anyone who doesn't have a lot of money for tools, check yard sales and flea markets. I got two coffee cans full of very good quality tools for $8, all in foam sleeves at a lawn sale. Most of the tools by themselves go for more than $8 each, and I got 28 of them.

The only rules are no jewelry in the shop, and use your imagination as fare as it will go.

I'm going to try to make one, using my dremel to make smaller cuts,to see how that works, just for the fun of it. You never know, it might work out OK.

Sorry to tell you, the HPI engines, are from China. I'm in the Merchant Marines, we pick up those engines from china, 23cc, 26cc, and 30cc for three different RC companies. Do you know how much HPI pays for them? It works out to almost $23 for the 23cc, and $28 for the 30cc. The are making a hell...

They need to put a wheel drag on the wheeled robot, to keep it from rocking.

You can use good quality paint stripper too, but don't leave it to long, it will eat the aluminum.

I don't know if you have checked out alishanmao's youtube channel, but he has a lot of FPV stuff set up on his skywalker. Just do a search for skywalker.

This is awesome of you, to take your time to do this, and all. I was thinking of doing one of these videos, but I get all tongue tied when I do a video, that's why I don't have any vids up. I'm a 47 year old kid at heart, and have been doing RC planes and vehicles close to 30 years now. I know it...