crazykincardineite's channel

Next time you have to pull those bearing races, run a bead of weld all the way around them on the inside surface, it'll cause the ring to shrink as the weld cools and it should just pop right out. Much less messy.

Video Response

@saclrpfrl10 What about a dodge van? :p

i'm totally disabling the seat safety on my craftsman and mowing peoples lawns like that from now on...

@mohamedgtv Canada wants to stop registering right hand drive vehicles.

Don't idle it that low, and make those pipes longer. You'll burn the valves out with those short pipes, and when idling that low, the oil slingers can't sling the oil to where it is needed.

@LynolsOffice Out of curiosity, what is the truck you're driving here?

You got nothin dicked today bud, somebody slashed all 4 tires on my dodge last night ffs. and the ball joints were good

@09FordFX4 The new explorer is so stupid however, they already have a FWD platform SUV, why have another? and I'm well aware that they used a 5.0L engine for years in the trucks, but it was a lower revving engine, the 5.0 in the new trucks produces its peak power and torque at a much higher RPM, ...

BEST LAWN MOWER MOD. EVER. It would go well with the chrome skull shifter on my craftsman. I also have a chrome 1/4 inch standout "SPORT" badge on the back of it below the craftsman logo

@slamansj Yes.

I wish my 97 Grand Caravan was AWD. I pull up at school next to a bunch of lifted 4x4 trucks with mud tires that never have seen mud, and i've taken my van trail running, mudding, and driven right past an f-150 FX4 that was spinning all four in a bit of snow.

@piratemen I'll get it put up as soon as I have the chance. You buy the pigtail that plugs into your factory wiring, and it has color coded wires that will match what are on your aftermarket radio.

@05fordgtx1 This spring I took a wire wheel and then a sanding pad (both on my angle grinder) to the underside of the deck and sprayed on three coats of truck bed coating. Should keep it from rusting out. Last year i only painted it and the paint was gone after a couple cuts.

@Tanks250 win

@snakesonaplane2 Its not as low as it looks, I have yet to hit it on anything a normal person would drive their van over. Biggest speed bump in town and it doesn't hit. I've only ever hit it on rocks. We do things differently with our vans down here.

@snakesonaplane2 i got a cherrybomb turbo and no resonator on mine with a tip out before the rear wheel, sounds mean. I get alot of weird looks when i pass people. between the "wow i'm getting passed by a beat up dodge caravan" and the "what the hell is that epic sound coming from" i get some loo...

@BloodyCorn I hadn't seen that before i commented lol. not the first time i've done that. I need to learn to watch the whole thing before i ask a question. Thats why i removed my comment. thanks tho

The relay for the blinkers is part of the 4-way switch on the dash, those cars had a recall on them for that part.

@97channel so true. so true.

My best friend rolled her dad's truck doin about 100k around a bend, hit the gravel a bit, gave er too much gas, spun the truck around on the road , hit the ditch, flipped it end over end and rolled it 4 times. busted both drive shafts, not a body panel not destroyed, drivers seat was twisted, sh...

@chimneswp right on, i got a little dirty friend too, she's pretty cute herself. likes to chooch me where my no no stinks