-
1 year ago
LATAMUD BOSS408 66 Mustang Budget Build dash cam trip#1
Drive around the neighborhood. Unfortunately my memory card was full after 5 minutes of driving. Oh well, I guess I will have to make another tri...
latamud • 949 views
cooperray76
commented:
-
1 year ago
Cobra II burnout
Cobra II, 850HP,Tremec 5 speed, trying to stay out of the 7000rpm rev limiter then letting off before things get to crazy.
TheCobra327 • 8,138 views
cooperray76
commented:
@Joint72
you can find that information on the mustang II website under "351W engine specs." on google; I've seen it!
-
1 year ago
351w mustang
coming off the trailer and parking it at the shop for a dyno
Jmont99 • 13,674 views
cooperray76
commented:
Next time can you do a burnout or something?
-
1 year ago
1970 Z28 CAMARO
EVEN THOUGH MY TOYOTA IS FAST.....ITS NOT THAT FAST...LOL
highflyer664 • 160,896 views
cooperray76
commented:
Clearly he doesn't know what "let it loose" mean, so please show him how it's done!
-
1 year ago
Fox Body Mustang 351w 12.8@111
1983 Fox Body Mustang 351W First time on a track. Ran a 12.849 @ 111.62 with a 2.067 60ft on Pirelli P-zero's 235/55/R17.
pixyspoxey • 2,152 views
cooperray76
commented:
you should cheat and just add a simple nitrous kit!
-
1 year ago
Sean's 351W Stang
11:1 Compression, GT40 heads, Roller tip rockers, Victor Junior intake, 6XX CFM Carb.
moparman20 • 131 views
cooperray76
commented:
Dude fix the camera!
-
1 year ago
1988 Mustang Dyno
342 Stroker.... and it's for sale!
Williamsport, Pa.
Ohmss12@hotmail.com for more details
steedanotch • 9,222 views
cooperray76
commented:
What exactly is your engine setup?
-
1 year ago
ROUSH 427R Drag Simulator
Going nowhere at 100 mph! See a ROUSH 427R Mustang on a drag simulator at the 2007 AirVenture Show in Oshkosh.
ROUSHperformance • 35,631 views
cooperray76
commented:
I'm a mustang man and I'm disappointed in this video; I use to have a stock '86 GT that put on a better show than that!
-
1 year ago
THR 357 inch Windsor Bullet Racing Copper Coupe
THR Texas Hot Rods 357 inch Windsor Bullet Racing engine in our newest Project Mustang CopperHead Coupe II. Check out the nasty little motor rollin...
THRstang • 191,340 views
cooperray76
commented:
What kind of cam and cylinder heads are you running in this beast?
-
1 year ago
turbo mustang running a 9 sec 1/4 mile
turbo mustang running a 9 sec 1/4 mile
jump454 • 16,414 views
cooperray76
commented:
Why did you take off so late?
-
1 year ago
Mustang Dyno 1/4 Mile Run
Mustang my brother and i have been building and racing the past couple years
Thiqpez • 7,063 views
cooperray76
commented:
What's your rearend? and engine in this beast?
-
1 year ago
Mustang II Tuff lil Pony
BBC 1978 Mustang II
lowet499 • 9,883 views
cooperray76
commented:
What's under the hood of this beast?
-
1 year ago
Our 77 Mustang II run 2
Carolyns first run and she smokes the newer Stang off the line at cordova raceway park
IImuchfun • 1,416 views
cooperray76
commented:
hey buddy, have you gotten that 331 together yet? I'd love to see a video with that monster running?
Very nice take off, you stayed with him and spun the wheels in second!
-
1 year ago
Cobra II
Cobra II, Supercharged - 14PSI, Solid roller Cam 550lift, 238/248 @50, H beam rods, scat crank, total seal rings, TKO 5 speed, 9" w/3.55:1. Run 10'...
TheCobra327 • 8,268 views
cooperray76
commented:
Is that a 302? she is absolutely beautiful!
-
1 year ago
62 ford falcon 393 stroker maiden voyage
first drive of my new 500hp ford 393
dfomocoguy • 20,010 views
cooperray76
commented:
What kind of cam are you running?
-
1 year ago
Bobbys 393 notch
Dyno run
sinful619 • 25,487 views
cooperray76
commented:
Bobby, lay on it and stop worrying about the straps!
-
1 year ago
Badass Mustang in Ocean city
badass 69
TKRPERF • 583,746 views
cooperray76
commented:
@91gt331
Dude just forget it, you don't have to prove yourself to anyone; thanks to "you", me and everyone else who is commenting was able to see this clip in the first place. Besides your right, to get that kind of sound isn't that hard, it depends more on how deep the owner's pockets are; un...
-
1 year ago
408w First Start - New Cam
.690/.680 Lift CamMotion cam, 408w, Forged Internals, Vic Jr Intake, QuickFuel 750 Race carb, AFR 205cc heads - Upgraded springs. If you want more ...
ChromedOutDubs • 24,526 views
cooperray76
commented:
with that being a street car, why did you go with such a big cam (600+ lift cams are for high rpm: you'll practically never get to that high of an rpm to get the full benefit out of that cam on the street). She still sweet though with an awsome sound I must add too; Please take care of her!!!!
-
1 year ago
5.0 mustang 1/4 mile pass in car
just driving the car down the track, BIG improvement over last year with the new heads and cam.
please watch my other videos to see more of the ca...
Xarmy187 • 29,029 views
cooperray76
commented:
@Xarmy187
Dude, your absolutely right; not everybody can afford to willingly tear their car up; I'm with you on that fact!
-
1 year ago
Street Car Drag Racing 7-second 1/4 Mile "In-Car" Video
www.10wideracing.com
Sit down, buckle up, and get ready to go from 0-173 mph in less than 8 seconds in the quarter mile!!!
Check out www.10wide...
tenwideracing • 1,296,860 views
cooperray76
commented:
it looks like that camero or firebird was just a second or two behind you; I give your opponent credit for tryin though, lol!
What's under the hood of this beast?
Don't mean to be a trick, but I'm tellin God you stole his car dude!
-
1 year ago
Camaro drag race crash
Camaro has a wild ride
dans57 • 716,081 views
cooperray76
commented:
that sucks, but I hope your not done racing. Build another one or something else and get back out on that track!!!!!!
-
1 year ago
The 68 Mustang is Finally Running
This is the 302 in my 68 Mustang. This is the first time it ran after tearing down the entire car wiring ans all.
echristen • 13,463 views
cooperray76
commented:
@torino390
I'm sure you can, what kind of car do you have?
-
1 year ago
Mustang Cobra II dyno power pull @ Big 3 Racing
www.Big3Racing.net
Big3Racing • 4,900 views
cooperray76
commented:
What's under the hood; what are the exact combinations are you running and at what compression?
-
1 year ago
ford lightning 5.4 mustang
5.4 mustang
chriskcon82 • 12,978 views
cooperray76
commented:
dude, I think you put more money into the body and interior than the motor; she looks decent, but I don't know if you win as many races as you probably think; but I really hope your happy with the results. I do admit, she is definately pretty. I wish you would paint it and post shows going down...
-
1 year ago
New Motor
12-26-07 - first cranking of motor
SuthernStang • 175 views
cooperray76
commented:
that's alright, you and yo old lady workin on it together; I like that.
I'm gonna try to get mine to help me out!
-
1 year ago
1993 Mustang LX Coupe 347 stroker idle
Just a short video of my 93 coupe.. see more at www.lxcoupe.com
threeforty7 • 177,014 views
cooperray76
commented:
@threeforty7
lol, at least your honest!
-
1 year ago
burgess performance mustang 5.53 on 275/60/15 drag radials
can you say small tire burgessperformance.net
fast383v8 • 40,659 views
cooperray76
commented:
Can you say go to a real track (1/4 mile)!
-
1 year ago
89 ford Mustang with 351w little burnout.
a little burnout at my dads apartments.
fastblue89 • 1,886 views
cooperray76
commented:
Dude, that car can do alot better than that, get on that thing!
-
1 year ago
351W Powered 1983 Mustang GT in car at the track
This is an in car view from a shakedown weekend trying to dial in my car. The car is a 1983 Mustang GT with a 351W and 5 speed. This pass I ran a...
Sweet83GT • 8,169 views
cooperray76
commented:
Beautiful, but power shifting will help in general. shifting normal leaves room (tenths of seconds) for the your oponent to gain the win!
Go to a big parking lot and practice: here's an easy way of doing it; first: pop the clutch around 3,500rpm at the track from the tree and floor the ac...
-
1 year ago
mustangmovie76
1976 Mustang Cobra II Fire up
wlemarque • 222 views
cooperray76
commented:
Nice ride Jr., but take a shot of the whole car and post it; If possible, do a post of the car in action (burn out or in car video going down the road).
-
1 year ago
393 mustang dyno pull
made 365 hp an 440 ft tq an the intake is killing the power at 4500 rpm
jamesefish3 • 1,145 views
cooperray76
commented:
it should be getting at least another 100hp. than that; what's the compression at and what cam and cylinder head combo are you using? The body is absolutely beautiful, how long have you had her?
-
1 year ago
BurnoutNorway • 11,254 views
cooperray76
commented:
Sounds like she needs to be tuned badly
-
1 year ago
NOS Mustang In Car
Ride in the back seat of Dave's 10'sec street mustang
redexpressracing • 176,533 views
cooperray76
commented:
Nice ride, what kind of cam are you running and is she a daily driver?
-
1 year ago
408ci / Jerico 4 speed
Fox body Mustang. 408ci W/ Jerico 4 speed
XXXLTRP • 50,868 views
cooperray76
commented:
You don't need to snatch the shifter in order to power shift, and you need to show the road from the camera view; this video is more about how you shift than about the performance of the vehicle. On the other hand she sounds good, great job on the build!
-
1 year ago
my mustang 306 testing the transbrake
testing the transbrake in the street
12secondslx • 22,927 views
cooperray76
commented:
@PooPoo2U
lol, your hilarious; thats a good one!
-
1 year ago
383w 351w stroker Mustang
351w Stroker motor, ported victor jr heads, ported vic jr intake, decent cam.
ef200098 • 2,458 views
cooperray76
commented:
not everybody can correctly do the eleanor garage pull-out!
-
1 year ago
Burnout with our Driving Couch Part 2
Before starting at the quarter mile the wheels must be warm.
This video was made at the bug meeting in Wilhelmshaven 2007.
Enjoy the other videos
...
phil1303 • 46,351 views
cooperray76
commented:
that is hilarious, some people don't know art when they see it so don't mind the negative comments. Great job!!!!!
-
1 year ago
Mercury Cyclone Very Fast Car!!! Great Lakes Dragaway 5/24/08 Horsepower X .Com
http://www.HorsepowerX.com The New Talk Forum!
hrspwrprofiles • 56,971 views
cooperray76
commented:
lol, I bet that thing weighs a tons and tons; but she looks good!
-
1 year ago
Contest for best wheelie won by AMC Gremlin
Brian Ambrosini's Gremlin
70AMX • 708,750 views
cooperray76
commented:
@70AMX
I really like the power behind it and love the video cause the car is so ugly, lol; but great job on building it up!
-
1 year ago
1989 Mustang LX.....built 347 stroker
Playing around in the Mustang
dtw0519 • 109,878 views
cooperray76
commented:
What's your exact set-up, she is a beast?
Dude really you need to go somewhere and really open this thing up to show the world what shes really capable of!