camaroboricua's channel

camaroboricua commented 2 months ago

1:31 Add to

5.3 Comp Cams Thumpr Un-tuned

Comp Cams Thumper Cam Part # 54-600-11, Chromemoly Pushrods 7.400", LS6 Valve Springs, Melling High Volume Oil Pump

Cam Specs: Valve lift .554 /.5...

421 views

camaroboricua said:

Sounds Good! look forward to a tuned and driving vid. How low is your idle right now? I just got mine running and the idle is so low it tries to shut off alot. I need to get it tuned asap....

• camaroboricua liked 2 months ago

+ One more: Likedshow less

camaroboricua commented 7 months ago

2:43 Add to

1996 Trans Am with Gen 1 SBC

350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

2,792 views

camaroboricua said:

I think the heads have sqaure port design. I used mac mid length headers and matching Y pipe. That way it didnt interfere with the slave. I had to drill new holes on the flange for the first and last bolt. Other than that they slid right in. On my old third gen I used heddman longtubes and those ...

• camaroboricua commented 9 months ago

  2:43 Add to

  1996 Trans Am with Gen 1 SBC

  350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

  2,792 views

  camaroboricua said:

  I took one with my phone when the cut out was closed. So its going through the bullet AND the Magnaflow catback. Ill try to load it up ASAP.

• camaroboricua commented 1 year ago

  2:43 Add to

  1996 Trans Am with Gen 1 SBC

  350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

  2,792 views

  camaroboricua said:

  I used a t5 out of a 90 camaro

• camaroboricua commented 1 year ago

  2:43 Add to

  1996 Trans Am with Gen 1 SBC

  350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

  2,792 views

  camaroboricua said:

  @fletchman96 The only thing that stayed from the engine wiring is the starter pigtails. The sensors and such can stay if you want to reuse them. Other that the rest o the wiring got chopped off.

• camaroboricua commented 1 year ago

  2:43 Add to

  1996 Trans Am with Gen 1 SBC

  350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

  2,792 views

  camaroboricua said:

  @fletchman96 Any sbc pulley set up should work. Mine is a serpentine from my old 90 camaro. The distributor is an MSD HEI unit hooked up to the ignition. The carb is a holley model # 3310. To make the distributor fit you have to cut out the top of the firewall all the way to the vertical part of...

• camaroboricua commented 1 year ago

  2:43 Add to

  1996 Trans Am with Gen 1 SBC

  350 Gen 1 SBC, Sportsman II Heads, Lunati 70102 Cam, Performer RPM intake, Holley 750 Carb.

  2,792 views

  camaroboricua said:

  @fletchman96

  Sure, I dont mind helpin out a fellow enthusiast. What kind of things do you want to know?

+ View allshow less