cajunrotor's channel

http://www.thepathfindersch...

http://www.timberbits.com - After applying the 20 coats of thin CA, to give it a high gloss finish I buff it with the micromesh sanding pads, Brass...

Morton's got the new Earlex 5500 Spray Station in his shop, and he's ready to demonstrate all the great features of this impressive finishing tool....

BBC Story here http://www.bbc.co.uk/news/u...

EDP Article

http://www.edp24.co.uk/news......

Just a guy commenting on the political clowns running the circus who are messing this country up

http://www.newwoodworker.co...

See the full story for more photos and details.

Here's a really simple, but functional and sturdy redwood doormat. It is made with one 2x6x8 foot board and held together with 8 screws. I used my ...

I decided to make a smaller, more streamlined version of my table saw sled. This one is much lighter and easier to use than my old one. If you have...

If you own a miter gauge any miter gauge you can turn it into a performance boosting miter sled in just a few seconds by simply docking it in pla...

This bench has a home-made steel scissor jack and a main shaft with right- and left-handed threads so the jack will lift equally from both directio...

In this video I show how the Adjustable Height Workbench can be operated with a cordless drill. I demonstrate adjusting the height and use of the ...

http://AskWoodMan.com/

______________________________­________

Be sure to check out the four other videos in this work table series.

_____________...

I haven't heard to best of things about the factory made mobile bases which can start around $75. Plus they all keep two wheels on the ground perma...

The final episode in rebuilding the 1944 Delta Unisaw. Popular Woodworking Magazine Publisher, Steve Shanesy takes a side-by-side look at features ...

1966 Delta Unisaw, Rebuilt in 2007

Here is an update to the Unisaw video that I have up on my website. I have finished the restoration on it and now it's like new (for a 65 year old ...

Some of the OWWM I've picked up over the years.

Took a chance on a pretty ragged looking motor and it turned out great!

My 1968 (Serial EA-981) Unisaw. Nearing the completion of its restoration, just shooting it running with the belts on, nickel and penny test both p...

You should never expect a table saw rebuild to go without a hitch. In this episode of the restoration, the behemoth motor decides to give out. Look...

Steve Shaney, editor of Popular Woodworking Magazine, part 1 of his unisaw restoration project.

This is my 1947 Delta Uni-saw just after I got her up and running. When I got the saw, the motor would not spin up and run. This saw has the ori...

Triton WCA201 Workcentre Series 2000 is a universal table allowing the attachment of a circular saw turning it in to a crosscut and mitre table saw...

Short tour of my shop, and in particular my festool sysport workbench.

please don't forget to vote, this a festool contest entry!

Review of RIDGID MS-UV

INCRA LS Fence Systems are simply the most versatile router table fences available, with capabilities ranging from basic shaping and edge forming t...

Click HERE http://garage-overhead-stor...

Build a great lumber rack for your shop or garage with simple techniches that do not involve complex joinery or alot of precise cutting or joints. ...

Joe Hurst-Wajszczuk, Senior Editor for Woodcraft Magazine converts his 20' x 20' attached garage in the October/November 2011 Issue #43 of Woodcraf...

http://www.thewoodshop.tv/

https://plus.google.com/113...

http://www.facebook.com/car...

I got a...

http://www.thewoodshop.tv/

https://plus.google.com/113...

http://www.facebook.com/car...

Spenc...

http://www.thewoodshop.tv/

https://plus.google.com/113...

http://www.facebook.com/car...

Just cl...