blockh34d's channel
Loading...
-
blockh34d
liked
1 day ago
Minetest mod: Growing Watermelons
This was made in the hurufu's fork (https://github.com/hurufu/min
etest) of Minetest 0.2 (stable is 0.3 but all mods are written for 0.4d), so it is... -
SKRILLEX - Kill EVERYBODY
From the "Scary Monsters And Nice Sprites" ep available for purchase here:
-
Ben Bennett solo Sept 15, 2011
The final Marotta Hour at OSU Urban Arts Space.
video shot by Sarah Weinstock
-
-
blockh34d
liked
3 months ago
Occupy Columbus Ohio
www.occupycolumbus.org
https://www.facebook.com/Oc...
http://twitter.com/#!/searc...
http://www.occupycolumbus.o...
htt...
-
Busy P - To protect and entertain(Crookers remix)
To protect and entertain originally mixed by Busy P remixed by Crookers. Pure pleasure !
-
Don rimini - Let me back up (Crookers Remix)
Heerlijk nummer :D
-
-
blockh34d
liked
6 months ago
The proxy - dancing in the dark (original mix)
electro the proxy ^^
-
Proxy - Dancing In The Dark (Dubstep Refix)
Proxy - Dancing In The Dark (Dubstep Refix)
-
How To Split A Blunt (Blunt Splitter)
How To Split A Blunt.
-
Thermite round 2
not your typical thermite
-
-
blockh34d
liked
1 year ago
Crispin Glover "Clownly Clown Clown"
Crispin Hellion Glover (born April 20, 1964) is primarily known as a film actor, but is also a painter, filmmaker, author, musician, and collector ...
-
blockh34d
commented
1 year ago
FRESNEL LENS SOLAR HOT WATER, Heat Solar Pool Heater Solar Swimming Pool Heater
This is a large Fresnel Lens focused on a copper tube with a 12 V pump (powered by two 6 watt solar panels) with wate...
I think you could use natural circulation (hot water rises) along with a slightly different configuration of tank and hotbox to remove the pump from the equation. I think the basic idea is have the tank ported at two different elevations, a high and a low. Water heats up in the hotbox and exits...
-
First Automated Laserscanner Demo
A short demo of David Laserscanner implemented by me to scan in a Guy Fawkes mask. Features a look at the USB laser control device I made out of a...
@marcelosouza a "laser level" (for construction gals/guys) splits the standard laser beam into a thin line for you. You can usually get one for less than 20 bucks. I dont think a servo is precise enough. You need to be able to move the laser line as slowly as possible. You could probably use ...
-
First Automated Laserscanner Demo
A short demo of David Laserscanner implemented by me to scan in a Guy Fawkes mask. Features a look at the USB laser control device I made out of a...
@BrutusJones Hmm i couldnt say, i just sort of improvised mine together out of stuff on hand. The "tricky" part was implementing an H-Bridge motor controller (for reversing polarity and controlling speed). Also you need to gear a DC motor way down (or use a stepper motor, but then you'll need a...
-
-
blockh34d
liked
1 year ago
How To Make Potassium Nitrate
Make Potassium Nitrate from Instant Cold Packs and Potassium Hydroxide
Warning: This reaction will produce large quantities of toxic ammonia gas. ...
About blockh34d's channel
XBox USB Controller Mod
This simple modification will allow you to use USB devices on your XBox running XDSL (Linux), and will let you use your controller on a PC as a USB...
4,022 views
blockh34d said:
@MYDRAGGIN84 you need XDSL, xbox 'damn small linux'. This puts a special small version of linux on the xbox preloaded with all the right drivers. Then you use your modded controller plug to plug in standard USB devices. A lot work right away. Good luck!