blg53's Channel

66 subscribers

72,177 video views

8:53

4 months ago

A greately improved Ringbom Stirling engine lights up a set of 20 large LEDs

An improved version of the earlier Ringbom Stirling engine connected to an electric generator. Still made with no lathe. The new electric generator...

3,380 views

blg53 uploaded
- 4 months ago
  
  blg53 commented:
  
  @mAdAsZaC Easier to make, no need to the exact parallelism between the two axles. Also easier to connect and disconnect.
5:33

8 months ago

Free piston Stirling Engine made with no lathe

This is a model free piston Stirling engine made from glass cyringes, tubing, cans, J-B Weld epoxy resin, some metal cuttings, wood blocks, plumbin...

7,044 views

blg53 uploaded
- 8 months ago
  
  blg53 commented:
  
  @ChristianSarbu The idea occured to me at the time and I even tried it. It acted as a spring from above which was surprisingly difficult to tune. Also a limiter was a simpler solution. In any case, once I put a load on it (check my next video) in the shape of an electric generator connected to ...
5:20

8 months ago

Prototype of a totally free piston Stirling Engine

This is an attempt to make a working prototype of a model Free-Piston Stirling Engine. The attempt was very successful. Hopefully in the near fu...

9,183 views

blg53 uploaded
- 8 months ago
  
  blg53 commented:
  
  @dmanofdland That is correct with the exception of my last Ringbom where the tube was already coming from the top like in this one. The old tube was only 3 mm inner diameter which was too narrow a passage for the air and air viscosity reduced the engine power a lot. This last tube is 5 mm and th...
4:01

10 months ago

Free piston Stirling Engine with linear alternator lights up incandescent bulb

This is basically the same model Stirling engine as in the previous video, but it has been made more rigid structurally and fitted with a linear al...

11,759 views

blg53 uploaded
- 10 months ago
  
  blg53 commented:
  
  @kalaa216 Thanks. Unfortunately I don't have any drawings or anything like that because I built it by trial and error from bits of scrap, cans, glass cyringes, some tubing etc.. If you read my description on this and the previous videos as well as my answers to the previous comments that would b...
4:04

2 years ago

Ringbom Stirling engine hooked to a generator lights up LEDs

The same Ringbom engine as on the previous video, but this time connected to an electric generator loaded onto a set of LEDs

1,185 views

blg53 uploaded
4:45

2 years ago

A Ringbom Stirling engine, no lathe involved in making it. Flywheel oriented horizontally .

A model Ringbom Stirling engine made from old hard drives, syringe, a car shock absorber cylinder, some Neodymium magnets, some tin cans and some t...

4,310 views

blg53 uploaded
1:26

4 years ago

Free piston (Ringbom) Stirling Engine Lights LEDs

This is the enhanced and tuned up version of the orininal Ringbom engine. It is now poweful enough to drive an electric generator to light up 5 bri...

20,467 views

blg53 uploaded
1:46

4 years ago

Model Rignbom Stirling Engine

A free piston Stirling engine. It is water-cooled, made from cans, washers, tubings, syringes and parts of old hard drives

14,849 views

blg53 uploaded

About blg53's channel

Created by

blg53

Latest Activity

Oct 26, 2011

Date Joined

Aug 16, 2007

Country

United Kingdom

less