applejak2000's channel

@kleetus92

@kleetus92

It would be interesting to talk to your dad. Perhaps we can communicate via email. There's two others I write back and forth to who are also building a 1 1/2" scale three-truck Climax as well. I live in Cleveland. I'm just about to cast the 9 spoke wheels in cast iron; and...

@dubstepaholic

I agree with ya! If these jokers can't figure out what Lisa Fischer does for this tune, let alone her backing vocals on other tunes, they're retards and non-serious Stones fans. That'ts all there is to it. Not to mention, would the Stones let a girl tour twenty years ( that's rig...

I've wondered...since there are two govenors what will happen if one is set to run appreciably slower than the other?

Who is the owner of this Shovel?

Thanks Joe,

I had to compare two sizes of a 1/8 scale model boiler to figure out just how much larger volumetrically one was, but had no idea how to do it. Very helpful indeed.

@algae1000

One, I'm not being rude. Two IT IS TRUE in the real world. The very one that I work in AS A MACHINIST. Like I told you look at the youtube video titled "Introduction to Machining on a Lathe " and you will see what everyone else seems to know, but you. And you keep insisting you're r...

Thanks Richie, this will come in very handy especially since most of the work I do in Live Steam hobby I just need to find the surface or edge within .001".

Roby,

Just stopping by after a long while, so great to hear this again. Thanks. beginning @ 3:02 sounds a lot like Volker Strifler who has played a lot with Robben Ford. Do you know of Robben Ford Or Volker Strifler ? Fabulous work you are doing! Love ya!

@xEnZoProDucTioNz

Not exactly, no.

@davethebluesdude

DAMN my eyes are goin' bad! I wish I could see it better!

@hellraiser7974

Not sure , but SERIOUSLY doubt that is a Squire.

There a lot of people complaining about Calos on this song but what's wrong with the solo that starts @ 2:29 ? Hell...Eric Clapton or George Harrison would have no problem with it, I'm sure.

@1944viking

Fuckin REALLY nice! It's like "Try this out for size, Iraqis! How do ya like it? We're fuckin jammin' "

Go Cav!

I was Aritllery '78 - '87. "Come party with Arty! It's all good! We get rid of unwanted guests, non gratus, party crashers. We specialize in 155mm and 8in. HE & Willy P...

FUCKIN" NICE!!

Pretty fuckin' sweet.. I listen to this a lot. NICE.

@trojanmusiclover

How bout a Route 66 run from St Louis to LA on a Harley Davidson XR 750? (look that up if you're not sure what an XR750 is). Now that's f*ckin jammin!

is that an 11" Westinghouse?

@Rockrol913 "Mainly because I was kicked off the band "

Then you were fortunate. This is one tired-ass band.

@rocketman697 how would milling a 5/8 slot on the bottom, as he has done, reduce "your ability to hold that back jaw square while tightening the vice..." ? It has absolutely nothing to do with that. Secondly I seriously doubt that milling a 5/8 slot "effectively reduces the strength an rigidity...

@Schmetty87

Some people are homeshop machinists (like me for example) who might build things like 1/4 scale internal combustion engines, steam engines etc so buying a Hardinge Chucker with all your so-called power and capacity would be major overkill and a complete waste of money. If you were do...

Thanks for making and posting this video John. I just bought a Lathemaster 9x30 and a PhaseII AXA QCTP so this and your other videos are quite helpful.

@MrJLHooker

There's plenty of blues --- you're too dimwitted to be able to hear it. You should change your screen name to MrJLRetardo.

Was this built from plans?

@aubhar

I agree! Pink could not begin to match gettin' a party started, as she claims --- roll back to somewhere about '76 - '88 let's see if Pink can even stand up after a night of drinking with us! Common Pink have a drink on US !!!! Ha Ha Ha Ha!!!

@TheCnut69

Yeah we've heard of Chicago, what does that have to do with serious blues? I don't see the connection.

Cindsrocksyo: You're a retard

@rejuco

You could have sent it Parcel Post much cheaper.

After all that's what Jasonmildwild does!! He puts on a dilly over his tiny dong and makes him his bitch!

@ChishisdeafIRL

you sound like a dumbass nigger

@boblackey1

What would be cool is to see --- you tell that to "Warren, Derek, Otile and tired Gregg&Butch (as you spelled it) " -- to their faces !!! I don't think you have the courage, punk. You talk a lot of shit but you cannot back it. I know fuckin well you can't play like Warren Haynes or ...

@alaadamy2

It's hard to make soup if you're a hard-headed bird!

What's happening with your Climax these days?

@Joedy860

1) how do you grind the cutter to the desired profile?

2) does the cutter the sides of adjacent gear teeth at the same time? or just one side of a tooth at a time?

3) are you familiar with Ed Hume's Climax?

@tristany3

Hi, if you can communicate with me via email or something I would like to see some sketches. I have SolidWorks and would like to try to model this mechanism. Simple as it may be, it's fascinating and out of the ordinasry to most people other than watchmakers and horologists. I'm a mac...

Big200dave,

I had the water pump and the timing belt replaced at 110,00 miles but over looked the tensioner. The mechanic didn't mention anything about any wear on it. How difficult is it to put in just the new tensioner myself?

Actually the Niles Canyon Railway Shay #12 located in Sunol Calif is the oldest operating. Built in October 1903. She needs new boiler flues but is still servicable. However as whimsical and financially irresponsible as California is (of any State in the Union) I wonder whether they can update th...