apatientspider's channel

This is how I fix the lose Tenon on Tobacco Pipes.

Explaining the physics of resawing on the bandsaw, and what leads to blade drift. http://woodgears.ca/bandsaw...

bandsawmill pictures and illustrations: I reposted this video because the music was terrible and you can't remove music on YouTube, just repost, bu...

http://woodgears.ca/jointer...

After six months, and a change of season, time to check if the wooden jointer is still accurate.

I'm sure that many of you have made knives that are far more refined than this one, but for somebody that would like to get started this is a great...

Here's a very simple way to create a fire from a single log perfect for cooking, or just long-lasting warmth.

Based on this article: http://www.eh...

This video is for the Challenge that Waldhandwerk (sepp) is having hope you enjoy

This is the smallest woodgas stove I have built. It was a combination of a campbels soup can and a refried beans can. It is not the fastest but i...

I bought this Butcher Boy SA-20 band saw from a local farmer. It was used to cut up steer. I put a hard fence on it , a new blade, and a dangle f...

Short intro film about pfeil wood carving tools

Chainsaw sawmill from Logosol using Stihl chansaw. Portable like an Alaskan mill but with extendable aluminium guide rail that definitely increases...

http://woodgears.ca/router_...

Exploring some of the possibilities that the tilting router lift opens up in terms of making molding with inexpensi...

http://woodgears.ca/router_... Showing how I built the tilting router lift, step by step

http://woodgears.ca/router_...

How I came up with the design for my tilting router lift, and taking it from SketchUp to paper templates

I used ...

Woodcarving exposition of Thai sculpture and artworks in conventional Lanna style created by carver artisans in authentic Burmese teakwood. ศศินันท...

This film was taken in 1998 when Ion Constantin was still able to turn a traditional wooden drinking flask on his pole lathe and he may well have b...

Another sawzall blade knife, this one for carving. Read more here: http://www.ibuildit.ca/Work...

Buy now: http://bit.ly/obTibw

Re-chuck your bowls and platters fast and easy with the new Modern Longworth Chuck.

Please subscribe to our channel...

Building a decorative intarsia plaque with a hummingbird on it.

Robin Wood makes a nesting set of bowls to commemorate the death of the 'last bowlturner' George Lailey who died 50 years ago. Inspired by Lailey's...

Robin Wood demonstrates how a bowl is made on a traditional foot-powered lathe. If you have any questions take a look at the forum on www.bodgers.o...

Flame Licker or Fire Eater Atmospheric (Vacuum) Engine. The engine runs by drawing in a charge of hot air and sealing it into a cool cylinder wher...

Forging nail-header with a friend

Just started making butcher blocks and thought I could try how my saw will handle 12 inches of mesquite.

Aside the motor the whole thing is homema...

Homemade surface grinder

Power hacksaw, got tired of making cuts by hand and didn't have the cash for a bandsaw, so I built this, works OK, if a little slow. Quicker and st...

ten feet long to mill finish some wind chime tubes using a belt sander