anickode's Channel

13 subscribers

23,770 video views

0:49

1 month ago

Briggs 18 HP Twin Opposed first run

This is the first startup of my recently acquired-from-the-junkyard Briggs opposed twin. It's the 18 hp horizontal shaft model. It was out of a ...

9,267 views

anickode uploaded
- 1 month ago
  
  anickode commented:
  
  @fordwillkillyou. All they asked for it was aluminum scrap value. 24 cents a pound at the time. Came out to be like 17 dollars.
6:38

2 months ago

Homemade static three phase converter and bead blast cabinet.

http://groups.yahoo.com/gro... My build can be followed here. This is a quick overview of my homemade bea...

MrBullfrog92 • 1,542 views

anickode commented:

You can fix the relay chattering when you shut the motor off by adding a 15k ohm 2 watt resistor in parallel with the relay coil.
4:37

2 months ago

Alex's snow maker - daytime

kdadnick • 9,957 views

anickode commented:

Built from scratch with no plans or blueprints. Just some research and a bunch of ingenuity.
2:22

2 months ago

New fangun nucleator test

This is the initial test of the nucleator for my new fangun. Water pressure was running at about 120 psi, air at 100. Water is regulated by a ne...

2,995 views

anickode uploaded
- 2 months ago
  
  anickode commented:
  
  Seeing as the description states that the compressed air is running at 100 psi, one could probably assume it uses a compressor...
1:53

3 months ago

Home Snowmaking 10 gpm SM4 test

This is a test run of my sm4. Specs are as follows:

10 gpm @ 250 psi

11cfm@ 100 psi

Bulk nozzles: 2x 5020

Nuc nozzle: 1x 6515

Needle valve

3/8"...

7,039 views

anickode uploaded
- 3 months ago
  
  anickode commented:
  
  @skiiboy101 I built it.
1:21

4 months ago

Cat 820 first run

My new old cat pump 820 with 2hp motor. Pulleyd for 10 gpm, running 3.5ish gpm with regulator set at 300ish psi. Need a glycerin filled gauge, ev...

240 views

anickode uploaded
- 4 months ago
  
  anickode commented:
  
  Don't know if you are familiar with high pressure pumps or not... But Cat is a brand name.
3:31

5 months ago

Burning Carpet

Burning carpet can be fun. do not attempt. :)

itskristiiix3 • 378 views

anickode commented:

You people are about the STUPIDEST most IDIOTIC DUMBASSES of all time. And you post this crap thinking it makes you look cool?
4:56

6 months ago

homemade 80 Gal. gas powered air compressor

My garage only has 110 power in it and re-wiring it for 220 was not an option. So i built this air compressor. It is a very good+impressive air com...

soldier05446 • 1,689 views

anickode commented:

Excellent job! The thing most people skip when building homemade gas powered compressors is the pressure actuated throttle control.
4:26

10 months ago

Dale Irvin's Friday Funnies - February 24, 2012

anickode subscribed to ProSummarizer
5:02

11 months ago

Awesome Voices 3

anickode subscribed to McGoiter
4:53

11 months ago

223 soft nose home made bullets from 22lr shells

for the comming economic collapse, i made dies from scrap to make .223 bullets from 22lr used brass. these dies where made on my cheapo drill pres...

danratsnapnames • 31,782 views

anickode commented:

That sure doesn't look like the grouping you claim in the description... You're all over the place with that tank.
6:17

1 year ago

Billy Joel "Piano Man"

Billy Joel Live"In Concert" at Tokyo Dome,Nov.2006

jetvane55 • 3,953,866 views

anickode commented:

You can tell he's gettin older in this video. He's playing in a much lower key than he used to... probably so he can still hit the high notes. Still awesome.
0:47

1 year ago

Insane Bus Driver Brutally Murders Snowman

ChiTownGuevara • 886,090 views

anickode commented:

Funny as hell, yes, but really stupid on the bus driver's part. He/she had to swerve into the oncoming lane to hit it, not to mention the damage that may have been done to the bus by plowing into 200 lbs of snow at 30 mph. Lucky it was a city bus and not a city cop that came across it first. :p
0:32

1 year ago

Metrodome Roof Collapse Video From the Inside Metrodome

http://www.amazon.com/gp/pr...

northstars007 • 5,308,493 views

anickode commented:

Lmao the guy at 0:10 running along the far sideline. They oughta sign him! He's movin' like a cheetah!
2:52

1 year ago

Home made tow rope

Home made tow rope.

funkynoodle08 • 4,473 views

anickode commented:

What kind of rope are you using on there? It may be fairly easy to splice as opposed to tying it to get a little bit smoother transition between sections. :)
1:32

1 year ago

Frankenstein Fangun!

This is the fangun I built during some downtime doing snowmaking at Mt Brighton, MI. It's made almost entirely of pieces and parts I found in the ...

1,511 views

anickode uploaded
- 1 year ago
  
  anickode commented:
  
  These are Spraying Systems Disc and Core nozzles. At the time of the video, it had 4 #8 nozzles and 4 #10 nozzles in it for very cold conditions. It's currently running with 8 #6 nozzles in it.
0:29

1 year ago

New fangun fan

I picked this up for free from work. It's too small for anything there, so I brought it home, replaced the burned out 1 hp motor with a working 1....

2,711 views

anickode uploaded
- 1 year ago
  
  anickode commented:
  
  @Twistsayin The gun is coming along pretty nicely now. You'd hardly even be able to tell it's the same fan! :D
0:57

1 year ago

Hall Effect RPM sensor for my Air Compressor

Hall Effect Sensor with an Arduino Mega and LCD output. Measuring RPM of my air compressor setup. Check out snowguns dot com for more home snowmaki...

7hereverendmaynard • 1,523 views

anickode commented:

Way to go Rev! Overengineering everything you possibly can! :D
2:05

1 year ago

Loveland Ski Area Snowmaking 10-8-2010

Temperatures dropped and the guns went back on! We're hoping we can keep the guns going strong every night. Stay tuned for more updates. Filmed/Edi...

LovelandSkiArea1 • 5,432 views

anickode liked

About anickode's channel

Created by

anickode

Latest Activity

Jan 13, 2012

Date Joined

Oct 12, 2006

Age

Country

United States

less