Successfully removed.
Sorry, an error occurred.
|
andy15m374l uploaded a new video
(3 weeks ago)
I'm recording a song for Thrown to Belial at my modest home studio. We used all natural drums other than the kick which we triggered with axis ekit...
more
I'm recording a song for Thrown to Belial at my modest home studio. We used all natural drums other than the kick which we triggered with axis ekit triggers. The kick drum sound is the speed metal sample on the Alesis DM5 module.
The snare is my 6.5x13 inch Tama Metalworks with a remo powerstroke 3 batter head. I tuned it really tight. The head was about to break from the tension and the rim was almost level with the head. I knew that snare has what it takes to cut through well without any sample replacement or triggering. I used an sm57 close up on the snare to get the impact and the pitch of the ring. Not much of the snare wires get into the track like that. I depended on the bleed in the overheads and tome mics to give me the wires and space. It worked pretty well.The toms are Tama Starclassic with Evans EC1 batter heads. They were tuned really low.
I used two Audio Technica AT2020 condenser mics for the overheads. I used an sm57 dynamic mic for the snare. I used MXL 993 condensers for each of the toms.
All of the microphone signals were recorded with a TASCAM US1641 audio interface. I put a live feed of the dm5 and the guitar tracks to his headphones for monitoring.
The camera is a Canon t2i with a sigma 30mm f1.4 lens. I did the editing with Adobe premiere elements using a custom rendering preset
less
|
|
| |
|
|
andy15m374l uploaded a new video
(1 month ago)
The entire song with the full band will be up soon along with a lot more stuff!
I'm recording a song for Thrown to Belial at my modest home studio. ...
more
The entire song with the full band will be up soon along with a lot more stuff!
I'm recording a song for Thrown to Belial at my modest home studio. We used all natural drums other than the kick which we triggered with axis ekit triggers. The kick drum sound is the speed metal sample on the Alesis DM5 module.
The snare is my 6.5x13 inch Tama Metalworks with a remo powerstroke 3 batter head. I tuned it really tight. The head was about to break from the tension and the rim was almost level with the head. I knew that snare has what it takes to cut through well without any sample replacement or triggering. I used an sm57 close up on the snare to get the impact and the pitch of the ring. Not much of the snare wires get into the track like that. I depended on the bleed in the overheads and tome mics to give me the wires and space. It worked pretty well.The toms are Tama Starclassic with Evans EC1 batter heads. They were tuned really low.
I used two Audio Technica AT2020 condenser mics for the overheads. I used an sm57 dynamic mic for the snare. I used MXL 993 condensers for each of the toms.
All of the microphone signals were recorded with a TASCAM US1641 audio interface. I put a live feed of the dm5 and the guitar tracks to his headphones for monitoring.
The camera is a Canon t2i with a sigma 30mm f1.4 lens. I did the editing with Adobe premiere elements using a custom rendering preset
less
|
|
| |
|
|
andy15m374l uploaded a new video
(8 months ago)
This is the dog I picked up off the side of the road a few years ago. Some people have asked for a new video of her.
|
|
| |
|
|
andy15m374l uploaded a new video
(9 months ago)
I got a message today asking some questions about adjusting this pedal. I had made this video before, but I decided to do a really to the point ver...
more
I got a message today asking some questions about adjusting this pedal. I had made this video before, but I decided to do a really to the point version with a slightly better camera.
less
|
|
watch?v=njsMIZGGAgU