algae1000's channel

This is the luckiest guessing streak on Deal or No Deal.

FOR MORE INFO READ THIS VIDEO DESCRIPTION

This is an induction motor, single phase, 127 V. Its nominal speed is 1625RPM.

4 poles.

First I run i...

Just me and my Maggie Muggs Ramjet, having some hot fun in the backyard...

Finally got the injector right...

www.Pulse-Jets.com

Foggles safety glasses homemade center punch and center finder

Modified electric scooter, super fast

2012 NHRA winter nationals at pomona DRAG RACE!

thread cutting maniac Josh is building a new ram for a hydraulic cylinder that is 8 feet long !

combo unit Bead Roller and English Wheel

Instructions for making a jig to cut keyways into a shaft

A short video demonstrating the sounds and motion of this benchtop lathe with backgearing disengaged and engaged. This is the later square head mod...

Atlas Lathe model D 12 x 36

This is my version of a metal lathe knob turner . To see more please go to www.redneckgadgets.weebly.com

Showing how a 16 tooth pulley was cut to fit on the motor shaft of my power hacksaw.

Taking a finish cut in a v block for a project I am doing. Its very satisfying doing jobs on this machine.

Build your own bearing separator and bearing puller tool.

Test run - I know that to I need to accustom oneself for work on this machine. I should get manual of this model machine.

This is one episode of that how I move my horizontal boring mill machine in my workshop. Sorry for music - it is fail. We had a cargo belt accident...

Navy SEAL "Tracker Dan" takes two taser shots at once and walks forward.

This shows propper mindset as a warrior.

LE/Security beware, tasers are no...

Grinding rest attachment to allow you to hold correct relief angles on lathe tools while sharpening. I doubt that this is an original idea but I ha...

Using a cigarette paper to find the surface or edge of a piece of material.

A simple modification to the mini lathe to allow accurate cutting when the carriage thimble is not precise enough. I use this in combination with t...

How to make a accurate taper with a standard lathe machine

metal spinning workshop DVD

Part Two

"Advanced Tools & Techniques"

metal spinning using split tools

When digging company bringed this axle to my workshop - there was not even smell remained from that bore... (tractor driver wheel broke off the ax...

At 2010 summer, in June at logging I see funny worm on my arm ... I take camera and film it!

Sorry for some mess in my Englush language. Depth of cut=2mm, speed=unknown RPM, feed=unknown mm/min because all of marks and number for speed's ar...

Speed-400RPM, feed= powered by hand. I use any way for my work be done. I use my homemade / selfmade tool with exchageable inserts by Sandvik.

this is easy to make and attach to lathe simple to threaddie thread homemade holder and attachment by sam

HIGH POWER MAGNUM AIR RIFLE http://rockntv1.blogspot.co... PELLET GUN SHOOTING

LATHE Armstrong tool holders http://rockntv1.blogspot.co... lantern style tool post left hand and right ha...

Grinding the I.D. of the gears out of my Hebard shop mule. The original bearings rusted out and disintigrated from sitting for so long and cut the ...