Ziknazoo's channel

http://MPGomatic.com drops the hammer on a 2012 Hyundai Genesis 5.0 R-Spec Sedan for a 0-60 MPH acceleration test. The Genesis R-Spec is fitted wit...

Oskar is now on Facebook: www.facebook.com/BlindOskar

Some of you asked for more Oskar videos, so here we go..... I took this video the day after...

Mike Portnoy at The Drum Pad's 20th avnniversary show. www.altitudedigital.com for more information.

The Drum Pad DVD is a 2 DVD box set that feat...

1977

PM Research #7 from an unmachined casting kit. See my video, "The Making of a Model Steam Engine", to see how it was made.

Building a PM Research #7 engine from an unmachined casting kit.

Amazing keyboard solo by the Wizard himself. Don't forget to visit his channel!!

http://www.youtube.com/user...

Steam Engine Build: Base casting, rotating assembly, and cross slides finished.

Aligning a lathe tailstock with a coax indicator

PM Research horizontal mill twin on live steam from the Maccsteam 3.5" marine boiler. Great combination, engine from John Coleman at TheSteamChest...

PTG Bolt Replacement Part 4

Phil Collins on the Drums. Percussion show.

Also on:

http://footu.blogspot.com

Harbor Freight 4X6 Bandsaw review and adjustments. How to get the most out of your bandsaw.

This video was uploaded from an Android phone.

Buford T. Justice Quotes from "Smokey And The Bandit 1". Enjoy!

Wow so many views :) thank you to all of you = you rock! :)

This song is on the 2007 Grammy entry ballot. This instrumental shows Noel Lorica's excellent fingerstyle guitar work, a true master & can be liste...

Measured runout of a homemade 5C collet closer for a Grizzly G4003 lathe.

This mix appeared originally in 1986 on the Geffen promo 7" and later in 1989 as the single version on 45 and cassette to promote the "Say Anything...

Using appropriate ball bearing bolted to a piece of cold rolled makes indicating in the lathe a breeze!!

I think this is a Buik but not too sure. If anyone knows then correct me please. Big HP dyno run using 2500 HP turbine unit.

1986 XR4Ti. XR:Sports Model, 4:4 cylinders,T:turbo,i:injection. bored 30over, heads & intake are ported & polished, turbojoes fuel rail,42lb inject...

Jeri shows how to build a dress that lights up when people approach.

The PIR Music Video - http://www.youtube.com/watc...

Follow my w...

All stock, 13k miles, first time launching with some wheelspin. For those who seem to think I'm trying to say the car is fast, and feel like they ...

250cc 120 DEG QUAD CAM V6 MODEL ENGINE, DESIGNED AND BUILT BY NEIL ROBERTS.

Making DIY gourmet mushrooms at home is difficult: you must buy a bale of hay, and must innoculate some sterile grain as "spawn." That, or buy a "...

Brian Cox ruffled a few feathers with a TV lecture which touched upon the Pauli Exclusion Principle. Two of our Sixty Symbols regulars - Ed Copelan...

I show how to make a simple circuit to power up and down arcade machine. This will save power and unnecessary wear and tear.

Can you keep a straight face?

Will make your IQ drop

Link this to your friends, it'll get a kick outta them ;)

Wondering about the song from thi...

Coaxial Indicator in tramming configuration. This two-part sequence demonstrates the probe length does not affect indicator resolution.

The target...

Dodge Viper GTS goes 0-150

I strongly advise using earphones for this video for best audio output.

I compare the stock mufflers with the Corsa axleback exhaust in my 2009 CT...

Starts at 3:10 ---

This engine and its twin were built by my father. He installed them in his 33' Bertram. That is a boat, which would explain th...

This is my first upload. I put this up because there are very few good clear videos of parting in steel using a manual lathe. Material is AS1045, A...

MrRPM 1107 outlander at quicksand dragway

MPGomatic.com puts a 2012 Mitsubishi Outlander GT to a 250+ mile test drive. [ Full Review: http://www.mpgomatic.com/20......

V8 Engine Block Machined From Solid on a Matsuura 5 axis MAM72-63V CNC state of the art Machine Tool

Tubalcain shows how to flame cut straight lines with the VICTOR track cutter. Oxy-acetylene cutting torch.

John Heinricy drives the 2009 Hennessey ZR1 at the Texas Mile. This is the first run of the event. http://www.HennesseyPerform... http://ww...

This is my metal shop and hobby room in the corner of the basement. I do all my metal work here and also my artwork.

An old Engklish "West Country" comic song! The usual challenge for singers was to remember the names of all the old men who hopped on Tom Pierce's ...