ZealCNC's channel
Loading...
92
subscribers
128,744
video views
Uploaded videos
1-10 of 13-
DeskMC-2.5D.m4v
ZealCNC
1,399 views
2.5D parts milling. Conservative cut parameters as we are machining dry. The surface finish is good, but tool selection could be better, and tool path needs refining.
-
DeskMC-panel.m4v
ZealCNC
1,155 views
Desktop CNC Machine cutting aluminium panel for electronics enclosure.
-
Acrylic head
ZealCNC
1,283 views
Just playing around, feed 2,500 mm/min, 3 mm depth, 24,000 rpm, polished carbide single 'O' flute cutter.
-
Vacuum table test
ZealCNC
19,099 views
Time to try out the vacuum table - working very nicely now. Thanks Steve! Cutting 1/8" deep at 160 ipm, 20,000 rpm. The feed rate was a bit fast, but no harm done.
-
First cut.AVI
ZealCNC
3,901 views
Another new machine, first cut - simple pattern in acrylic. This machine is running Granite Devices VSD-XE servo drives with automatic hard stop homing and software limits.
-
Plastic ISO20 tool holder
ZealCNC
3,731 views
Trying out CAM software for turning - making a 3:5 scale model of an ISO20 tool holder in black Acetal plastic. The finish was very good until the finish pass, which I ran ...
-
Micro Lathe turning 304 Stainless Steel
ZealCNC
15,610 views
Here's the Micro lathe turning some 304 Stainless. Very nice surface finish, but limited to light cuts by limited spindle power.
-
Micro lathe Jog & spindle test
ZealCNC
12,301 views
Brief test of Z axis jog and spindle, starting at 1 rpm, up to 4000 rpm
-
ER32 spanner set
ZealCNC
5,665 views
Making a set of ER32 spanners for the Micro lathe...
-
Making a coupling
ZealCNC
3,580 views
Here we're making half a flexible coupling to connect the live lathe tool we're using for a spindle on our Micro lathe to the servo that will drive. it. The other side is t...
Advertisement
About ZealCNC's channel
more
less
Play all(13)