Yakflyr's channel

I loved listening to the Luther Show when I lived in Chattanooga. I was only 20 years old in 1970 when I began working for a CPA in Rossville,Georgia and being the only one in the office while he was out of town during the week, Luther kept me company via the radio. Over the past 41 years I have ...

Oh yea, Great flying!You got balls.

Sounds like the position sensor has a dead spot.Sorry to say but I think you sould send it to JR.In my experience servos mostly fail one way.locked to one side or the other and that would be a disaster with a fast plane like the habu.I have one also and would hate to loose such a beautiful plane ...

He looks as though he lost this right engine. You can hear the pitch of the turbine changes as he starts to fall.Look at some other videos of this same plane doing that manuver just fine!

would you share your setup?I have purchased all the electronics except the motor and have been looking at video after video to find what fast setups people are using that will work for more than 3 flights before getting cooked.

Thanks,Nevin

Was it the ESC? It sounded like the motor stopped very suddenly.Hope there wasnt much damage.

Sorry for your fire but at least it will live to fly another day.

Great to see you got the RSSI buit and working.

The point of all that is to get your antennas as far away from the carbon fiber and the other electronics as possible synce both kill reception. If you would like pictures of my setup just let me know.I have been out 5000 feet with no patch so its a proven system.

PS.build an RSSI for your OSD.Ty...

If you fly with the stock servos that would be my guess. its a bit of a pain but you should switch to the hs65mg or the hs5065mg.great servos(the latter is the digital version but the analog works fine for me going 150 flights still no slop in gears).

Did you mix in the down elevator 1mm and 2mm to the flaps?

says the guy who probably doesnt have patience to build one.

the sound you hear is the off ballance spinner. I have the t-34 also and run 5cell on a power 32 and a 11/10 apc prop. I had the same problem one flight after a prop change and it was even louder.If you dont get an aluminum spinner you will eat your bearings up and kill your electronics due to th...

great flight.

Do you have the 8 cell motor in stock or is there still a month waiting period?

Also I have the CC ice 100 lite. Do you think it will be ok? I know you are only pulling 80 or so amps but the lite ESC is only rated to 6 cell.

Thanks

what pilot figures did you use?

What motor are you using?Is it the 16/40/1.5 ? Great flight by the way. That thing was screaming.Any thrust numbers or speed numbers?Thanks, Nevin

@LPmeteora082 Any one should have there own views but dont be like any one else in this world that throws words around on the internet like calling a person you dont even know a "little pussy" you are more than likley the type that doesnt speek up in your own life but does so with comments like ...

That is the exact reason that I as well as alot of modelers I know will not use spektrum systems. I have lost more planes due to spektrum systems than I have ever owned at one time.This is the reason that spektrum is coming out with the DSX system to replace the older DSM 2 and I hope they fix th...

looks like you started the engine clockwise the first time and counter the next?

fire buckets, really?

The problem you are having is the vibrations from your motor magnify as they travel through the plane (at least on some of the planes I have had) and the vibrations are matching or just clashing with the cameras frame rate or capture rate and causes vibrations to be captured at different points ...

Thats the highest quality sub micro fpv setup I have ever seen, the picture is great.

Great job! I know how hard it is to work with something so small.

Where did you get your gear?

@tech4156 Just end it. By writing back more of what your last message said will just make you look more pathetic, that you think hitting any woman is fun.

Funny from all of the people that I have met why is it mostly black men are more common to disrespect women and beat them up over white Asian...

Thats funny how he has his little bitches standing around watching him like puppets.

if you want pictures of my rig I would be happy to send you some pictures so you could get some ideas. I have everthing besides a rotating boom camera with zoom packed into just a t-rex 450 se v2 with a torque tube but that is almost done other than the bearings. But even though it is a VERY SMA...