XsavioR38's channel
Loading...
19
subscribers
9,840
video views
Uploaded videos
1-10 of 24-
Pixeltest1TimeLapse.asf
XsavioR38
23 views
Second attempt at time lapse. This is testing the pixel placement after implementing variable width and height of the drawing.
-
drawing
XsavioR38
17 views
First attempt at time lapse .
-
Chronos door lock.avi
XsavioR38
899 views
Chipkit MAX32 , 2 xbees, Chronos Control center, and a chronos watch controlling a servo. (im gonna hot glue it to my door nob lock switch and not have to use my key any more)
-
Drawbot square.avi
XsavioR38
56 views
First decent attempt at drawing . Need to replace the string because i cut it to replace the cady. But decent results.
-
Drawbot half mounted
XsavioR38
72 views
The Steppers and the controller are mounted. Next up is mount and crimp the connectors for the power supply (TDK-Lambda ZPSA20-5) . The idea is to mount a piece of MDF for ...
-
drawbotv2 fixed.avi
XsavioR38
27 views
Got the drawbot pcb working as desired with both motors , had to stick a bigger cap on the vcc vdd lines because my power supply is only 2 amps.
-
drawbotv2 green wire.avi
XsavioR38
18 views
So I got dyslexic and screwed up my pcb. But quickly identified the problem and fixed it. Failing , is part of succeding . Never be to hard on your self. you might just ...
-
wireless drawbot.avi
XsavioR38
64 views
Using Hyperterminal and some xbees to drive the drawbot. The only connection to the board is power. The second breadboard , is a bunch of pull ups and pull downs so i didn...
-
motor controller demo 2 v1.0.avi
XsavioR38
17 views
Wrote some code to have an interrupt driven start , pause resume button.
Wrote the code for trimming motor positions. Light press moves 4 steps , held press rotates until d...
-
motor controller demo v1.0.avi
XsavioR38
23 views
I finished it last week in a day but didn't have any motors to plug in and try until just now so Here is the first test. This is the Makeitlast draw bot
If you look clo...
Advertisement
About XsavioR38's channel
more
less
Play all(24)