TwoLiterTurbo's channel
Loading...
-
TwoLiterTurbo
commented
3 weeks ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@Andi33344
In CA there are very strict gun and car laws. My car is very illegal there, as well as all of my guns. I like having the freedom to do what I want.
-
TwoLiterTurbo
commented
3 weeks ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@91Riff
Lol, I'd rather have the FD RX7 personally :) But thanks!!!
-
TwoLiterTurbo
commented
3 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@l8nightjay
Thanks! I haven't gotten it tuned yet. Things keep coming up that take money away from the project, lol. The new motor is done and almost all the way installed. Then I have to raise the funds for the tune to FINALLY get it all ready.
-
TwoLiterTurbo
commented
4 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@bmxguy08
The motor lasted just fine. I put in a different one that I built seperately, got a new tune for it from emance because I ran out of money, and the ring lands went out within 600 miles due to the tune. I DO NOT recommend emance whatsoever! The new motor is going in soon, with an AEM E...
-
TwoLiterTurbo
commented
7 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
Built motor is almost finished. Over the next 2 or 3 weeks I'll be putting it in the car. Then I'll have an appt to get it tuned. Then engine break in, followed by a retune. THEN I'll be able to see what it's capable of, lol.
-
TwoLiterTurbo
commented
7 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@needshift
I work in Portland, I live near it. lol. This dyno was taken when I lived in southern OR. Car is getting tuned at PSI this summer with my new motor. 370Zs are sweet cars, wish I had the cash to pick one up, lol. Maybe if I didn't blow it all on a $500 car... ha ha
-
TwoLiterTurbo
commented
8 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@YZ125ups
Not sure, but I've gotten the car up to 165-170 in the real world (On a track)
-
-
TwoLiterTurbo
commented
3 weeks ago
Awesome 240SX SR20DET Burnout!!!
Needed to get rid of some tires.... lol
@edward9999100
Ha ha, that would have been sweet. They are spendy though, and I was just getting rid of some worn tires anyways. I'd never do that to new ones!!!
-
Awesome 240SX SR20DET Burnout!!!
Needed to get rid of some tires.... lol
@nnr3
Ha ha, I'm good!
-
Awesome 240SX SR20DET Burnout!!!
Needed to get rid of some tires.... lol
@bonghits420dome
You just lightly press the brake pedal. The front calipers hold you in place, while you overcome the rear calipers. Just make sure you let the rear brakes cool before you pull the e-brake, or you'll warp them, ha ha. It's called a brake stand.
-
Awesome 240SX SR20DET Burnout!!!
Needed to get rid of some tires.... lol
@braaaapp
Shittier too...
-
Newly Built SR20DET: GT3071R, 260 Tomei Cams, Etc...
Crappy cell phone video of my newly built SR20DET. 0 miles on it, ready to break in. No leaks, and new tranny shifts smooth!
@240sxGuy3
I will as soon as the new motor is in, lol. The one in this video was destroyed due to a crap tune. The new one is even better :) Should have it in within a month!
-
Newly Built SR20DET: GT3071R, 260 Tomei Cams, Etc...
Crappy cell phone video of my newly built SR20DET. 0 miles on it, ready to break in. No leaks, and new tranny shifts smooth!
@bova17
2_Liter_Turbo
-
Newly Built SR20DET: GT3071R, 260 Tomei Cams, Etc...
Crappy cell phone video of my newly built SR20DET. 0 miles on it, ready to break in. No leaks, and new tranny shifts smooth!
@winescargo
Thanks! Hopefully in a couple months I'll have some major updates!
-
Newly Built SR20DET: GT3071R, 260 Tomei Cams, Etc...
Crappy cell phone video of my newly built SR20DET. 0 miles on it, ready to break in. No leaks, and new tranny shifts smooth!
Actually, the machine shop who did the bottom end didn't do it correctly. The bore ended up distorting and the ring lands cracked on the new pistons. Saving up money to get it redone...
-
-
TwoLiterTurbo
commented
6 months ago
1992 Nissan 240SX S13 Redtop SR20DET Twin Scroll GT3071R
This is a quick look at my engine bay, and a test run running 19psi on an internally stock SR20DET with a GT3071R ... Which ran a 12.30 in the 1/4 ...
@jdmcommute
I honestly don't know. The shitty tune was just an ecu flash, and I was given no information about the tune. I also had no way to pull that kind of information out either. That all changes with my new setup, as I have an AEM stand alone now. When the car is tuned, I will post it up.
-
1992 Nissan 240SX S13 Redtop SR20DET Twin Scroll GT3071R
This is a quick look at my engine bay, and a test run running 19psi on an internally stock SR20DET with a GT3071R ... Which ran a 12.30 in the 1/4 ...
@THEHOLYDIVE
Tial Q BOV
-
1992 Nissan 240SX S13 Redtop SR20DET Twin Scroll GT3071R
This is a quick look at my engine bay, and a test run running 19psi on an internally stock SR20DET with a GT3071R ... Which ran a 12.30 in the 1/4 ...
@diacris1995
For an SR20DET swap (stock), it is for the most part a direct swap. There are just a few wires to extend/modify for all of the electronics to work (assuming you got the sr ecu and wiring harness). You will need an SR downpipe, radiator, heater hose kit and intercooler kit to also m...
-
98 ProCharged Mustang GT vs 92 SR20DET 240SX
My buddy and I racing each other at the strip last year!
@levelgx
Lol, this video is VERY old. I'm long past anything remotely stock on the motor now :) The T25 lasted me 3 years at 15 psi btw...
-
98 ProCharged Mustang GT vs 92 SR20DET 240SX
My buddy and I racing each other at the strip last year!
@Viking445
Lol, tell me about it! It happens once in awhile though...
-
98 ProCharged Mustang GT vs 92 SR20DET 240SX
My buddy and I racing each other at the strip last year!
Stock t25
-
-
TwoLiterTurbo
commented
9 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@Viking445
GT3071R
-
TwoLiterTurbo
commented
9 months ago
@FUZZYFL0UNDER
I'm 6'4" and 290 lbs. So yes, lol.
-
TwoLiterTurbo
liked
8 months ago
-
-
TwoLiterTurbo
uploaded
9 months ago
1990 Toyota Celica Alltrac First Time Ever Rally-X Run
My first time racing at the "Oregon Rally" Rally-X in Hillsboro, OR. Was in my Toyota Celica Alltrac (GT4 or GTFour elsewhere). It's AWD Turbo. For...
-
TwoLiterTurbo
commented
10 months ago
first start up
First start up on my built motor.
Sorry for the crappy video.
That's awesome man! Can't wait to hear that turbo spool!!!
-
TwoLiterTurbo
commented
10 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@cattalisxxx
Apexi GT Spec (3" to resonator, 3.75" from resonator back).
-
TwoLiterTurbo
commented
11 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@jermzyworm
I was actually referring to the fact the pulsar had a FWD style (transversely) mounted motor, and bolts up to the FWD transmissions. I know the Pulsar GTI-R is awd, lol. I've worked on the motors.
-
TwoLiterTurbo
commented
11 months ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@tomkkkkk
Actually I do, as I am a mechanical engineer...
-
TwoLiterTurbo
commented
1 year ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@corvette4554
The Silvia and 180SX have a rear wheel drive SR20DET, where as the Sunny, Pulsar, Bluebird have a front wheel drive SR20DET. Almost the same motor (minor differences), but different drive train layout.
-
TwoLiterTurbo
commented
1 year ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@240sxGuy3
The usual stuff, rods, pistons, etc. I have tomei 260duration/12mm lift cams with solid lifters as well. Same exact turbo setup pushing more pressure (going to about 27psi or so, basically whatever the injectors can handle). Yes, I have an AEM EMS.
-
TwoLiterTurbo
commented
1 year ago
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@240sxGuy3
I'm working on the built motor now. When it's done and tuned, there will be a video. Things have gotten in the way, that's why it's taking so long, lol.
-
-
TwoLiterTurbo
commented
11 months ago
drift practice raw/unedited
drift practice in grants pass. using my custom camera mount.
@luv2driftz28
For sure man :) It would be a good clip inset an external cam angle. That would be sick :) You could get Justin to help with that I'm sure!
-
TwoLiterTurbo
commented
11 months ago
drift practice raw/unedited
drift practice in grants pass. using my custom camera mount.
I'd probably use a different mounting spot. You can't see much here :)
-
-
TwoLiterTurbo
commented
1 year ago
Looks great man! I've been following the build on alltrac.net! After my S13 is finished, I will be starting my ST185 build as well, lol.
-
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@Jlizel
Lol, if your CA would rape an SR, show up at a track with me and we'll see what happens... Comparing other peoples motors instead of your own is also rice boy talk, lol. If I were to do that, I'd just bring up the Mazworx 1600hp SR... There is a reason why Nissan scrapped the 80's techn...
-
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@Jlizel
Lol. I've had the SR for five and a half years (my 240 for 7 years), and I got it because it was the best choice for what I am doing with the car. I could care less how popular or rare a motor is. That's just rice boy talk... I care about the performance of a motor. I wanted a light, st...
-
11 Second Nissan 240SX SR20DET Dyno Runs
I wanted to get a baseline dyno run in before installing my built motor. This is a completely stock SR20DET with a larger turbo, injectors and supp...
@drifta4u
I did not use my brakes on the dyno
-
About TwoLiterTurbo's channel
Celica Alltrac st185 rev. Stock exhaust with 3 inch downpipe
Mods that might matter in this video:
Gt-Four RC motor
Berk 3inch catless downpipe mated to stock exhaust
-Currently for sale
NOTE: the click ne...
67 views
TwoLiterTurbo said:
How did the Berk DP fit? I have a full 3" exhaust on my ST185, but a cheap TopSpeed DP that makes my 3" midpipe rattle against the tranny. It made the stock Midpipe hit a little also, so I know it's the DP. Did the Berk make your stock midpipe move at all?