TheElsyd's channel

When Mercedes wanted to promote its new fuel cell vehicle, instead of placing it squarely in front of everyone in the world, the company decided to...

Flying robot quadrotors perform the James Bond Theme by playing various instruments including the keyboard, drums and maracas, a cymbal, and the de...

CubeStormer II solves the Rubik's Cube puzzle faster than the human world record.

This ARM Powered robot was designed, built and programmed by Mik...

This tutorial is a continuation of my tutorial on creating packages. This part explains how to create a schematic symbol and combine it with the p...

Lesson 12 in my Eagle tutorial. In this lesson, we will cover the top six questions that I have been asked either through the comments or private m...

Lesson 10 in my Eagle tutorial. In this lesson, we learn about how to make the "disappearing copper pour" come back and also learn about running a ...

Lesson 9 in my Eagle tutorial. In this lesson, we continue on with running traces, but this time we use the autorouter to do the rest of the job fo...

Lesson 8 in my Eagle tutorial. In this lesson, we continue on with creating a board design and start some manual routing. We also learn about the ...

Lesson 6 in my Eagle tutorial. In this lesson, we start actually creating a board design with the schematic we created in the last several lessons.

Lesson 5 in my EagleCAD tutorial series. In this lesson we will finish our schematic by adding a couple of parts and prepare for starting on the bo...

Lesson 3 in my EagleCAD tutorial series. In this lesson we will start a schematic for a real working circuit. In this case, a voltage regulator, ...

Lesson 2 in my EagleCAD tutorial series. In this lesson we learn about some commonly used tools in the schematic editor and how to do some simple m...

Lesson 1 in my EagleCAD tutorial series. In this lesson we learn a little bit about the home window, how to create a new project and open a new sc...

Very unique 4-stroke engine with opposed graphite pistons running in precision glass cylinders cut from a glass 20ml syringe. The combustion fires ...

Delta Pulse 3 metal detector first sample end software

CLONE CHANGE AVR WITH DISCRIMINATION PULSE I

The original Sean Kinkade (SK) Park Hawk! Version 1! What an amazing machine. Its hard to believe when you first see it, but it is the easiest thin...

This is a tip for squaring up your vise fairly accurately without spending time using a test indicator each time. At the time I shot the video, I ...

Inspired by the category "Things That Are Not Steampunk" on Regretsy (http://www.regretsy.com), and (of course) those peerless purveyors of Euterpe...

A sunny day in March 2010.

ROV in a small Swedish lake. That day, we find both pike and a frozen toad.

This TFT LCD is working for Arduino Atmega168 /328

Jem Bendell is a professor and the owner-director of Lifeworth Consulting, providing solutions for systemic change towards sustainable development....

What is the Diocese of Bristol and how do you and your church fit in to it? We've made a short animated film that explains all.

Many people ask w...

Making a cylinder head for a single cylinder hit and miss engine.

Core making moulding casting and machining operations.

The engine is an Olds Gear...

First look and basic setup of the HobbyKing Quadcopter Control Board. http://www.hobbyking.com/ho......

Unique 4-stroke IC engine with two opposed pistons in one and the same cylinder. Very easy design and made from 100% barstock materials with standa...

Dapper Cadavers performed @ the Portland Farmer's Market -- 4/18/09

Martin Allard, through his company Mallard Concepts, produced low-cost FM broadcast transmitters for use in developing countries. He worked with UN...

Will my dream come true ?

I am record holder of 9 world records (Guinness World Records). I am also inventor and author of books.

Take a look at my...

Single cyl 60cc , bore 1.5" , stroke 2", C.R 50:1 , fuel pump pressure 1400 psi,fuel is biodiesel ( frying oil), rpm 850.

Making a greensand mould and casting an aluminium cylinder for a model hit and miss engine. ( Blooper included ! )

This casting needed a core to produce the required shape. The core could only be supported at one end so a cantilevered one was used.

Casting ten model cars using a snap flask to make the moulds.

Casting parts for a model engine in aluminium .A sand core is used to make the casting hollow.

How to make a greensand mould using a loose piece.

This is surely a 'must see' video.

Drew Berry, biomedical animator for The Walter and Eliza Hall Institute of Medical Research (WEHI), is a key m...

http://LifeWithoutLimbs.org

Nick Vujicic and his attitude serve as a great examples of the celebration of life over limitations.

The human spirit...

A Look At OOPArt and the amazing Antikythera Mechanism

A proving run for a design of piston valve model steam engine

This is the prototype of an orrery that I will be selling in the near future. The sun, earth and moon rotate and orbit in their correct relationsh...

Using an Oscilloscope and signal generator to tune A Tesla Coil to find its resonant frequency www.hvtesla.com

More than 21 centuries ago, a mechanism of fabulous ingenuity was created in Greece, a device capable of indicating exactly how the sky would look ...

SV Tenacious sailing between Weymouth and Poole.

Started in Jersey on 12th June ended in Poole 17th June 2011.

Via Cherbourg, Weymouth, Swanage.

...

Maggie Nelson (voiced by Academy-Award®-winner Anna Paquin of THE PIANO, X-MEN) is a student at the High School Of Dramatic Arts and a rising star ...

Togethr (...coming soon at http://www.togethr.at) will be a mobile social platform for place-based activism, using the mass-collaborative power of ...