Tagacrd's channel
Loading...
-
6 months ago
Six Pack Abs 2011 Workout
http://www.BodyRock.Tv - visit my fitness blog to follow my daily workouts, diet tips and exercise challenges.
Tagacrd
liked
-
9 months ago
P0401 Honda Accord, Cleaning EGR Passages
I know I'm jumping around but it will all become clear in the end, I hope. This is once again that same Accord that I worked on but this time I fo...
Tagacrd
commented:
-
9 months ago
2002 Mitsubishi Galant Engine loud knocking or tapping
Took with my cell phone camera.
FINAL UPDATE: Ericthecarguy on Youtube successfully diagnosed the problem to be the water pump. Take a look at the ...
Tagacrd
commented:
I have a 98 v6 accord that recently threw a p1491 code, would I need to replace the egr or should I look elsewhere for an underlying problem. It was showing a 0401 until I ran seafoam through it.
-
9 months ago
Tool Review Demonstration Backcountry Access Tracker DTS Beacon One Color, One Size
Tool Review Demonstration Backcountry Access Tracker DTS Beacon One Color, One Size. This one is available online for around $250
-
9 months ago
Long Travel Susp Build pt 15
Whats the plan plus 930 plunge vs 930 non plunge cv joints
-
9 months ago
The Labor Shift
I'm sure this one will spark a lively discussion and I welcome your comments. Let me know what you've experienced w...
-
9 months ago
No Crank, No Start Diagnosis
Visit me at
Whenever you have a no start condition when attempting to start your vehicle it's important to make the...
-
9 months ago
P0401 EGR Valve Port Cleaning
This is my DIY for clearing the CEL code P0401 (EGR Insufficient Flow) on a 98 Honda Prelude.
In cars with OBD2 if the EGR valve is restricted by ...
Tagacrd
commented:
@TheFrhen Hope you did'nt buy it there because it only cost about a $105 at tasauoto.com
About Tagacrd's channel
Hey Eric, 98 v6 honda accord is the car in question. It threw a p1491 (egr valve lift insuff.), I changed the egr valve, while I was in it I decided to check that passage under the manifold. Yeah, that one right next to the throttle and it was clogged. Cleaned top and bottom passage with small sc...