StarHoppen's channel

@nitroplanes : What "shipment for the parts" are you talking about? The parts that came with the plane in MY shipment had the two red-head civilians that are far too small for the scale. That's the 'Bobbsie Twins' I mentioned.

Are you saying I can order the Mil-type pilots from the Spare Parts ...

Don't worry little buddy - just keep practicing and one day you'll learn to work that clutch with the gearshifting properly. *LMAO* Practice, practice, PRACTICE!! ~;)

And when you're ready, I'll let you try my Yamaha 'Golden Hammer' on for size.

Just ribbin' ya, of course - nice riding with yo...

Barbara??? Sorry, but it sounds a lot like Laura Cantrell singing this John Prine song. It happens to be one of my lifetime favorites -- I was in Da Nang with the Marines in '64, and cannot hear it without choking up. There's so much meaning in these lyrics, most people will not understand....and...

That's the diff in you & me -- after just 5 minutes of hearing that beat, I don't EVER want to hear it again! *LOL*

@ipodtouchman1994 Hi;

Get yourself a Sky Surfer from Banana Hobby or its clone, the Bixler from Hobby King. I recommend the SS as, Hobby King has absolutely NO warranty, despite all they will tell you - they are very misleading. BH isn't much better, but at least they have replacement parts avai...

Hi Guy;

Was supposed to maiden my Dynam Texan this past Sunday but we got rained out.

Incidentally, there's been lots of problems reported with those retracts so, be glad yours work! I noticed in brief glimpse yours has same problem as mine in that one doesn't fit flush in the well but is slight...

Will be maidening my Dynam AT-6 today at our club meet if the rain moves out in time - thought I'd check out your flight for the warned-about tip stalling. But, before I get there, ummmm....World War 3?!?!? (At 0:20 in ur vidi) Must've missed that one, mate! O Canada must've had things tougher th...

Bill; had another couple questions but ran out of characters.

Your 2217-6 BL motor - was that the 1500Kv version?

How thick was your base Depron sheet?

And finally....not including Tx & Rx cost or time-in-building, how much would you estimate total money in materials?

Thanx guy - and again, K...

Hi guy;

You might want to give these a try for replacements:

//toysonics*DOT*com/digital-servoless-retract-landing-gear-3­2g-pz-15090-1pc.html

Mine work fine (knock wood) - cycled 30-35 times before assembling but not flown yet, but others in our AT-6 Group have reported good success with these....

Nice presentation - but, you can just BUY a 12V 5A power supply with multiple tips to fit most any standard input charger socket. Got mine, normally used for powering laptops, for ~$11 to power my Turnigy Accucell-6 -- works like a charm, doesn't even get warm. Get on Amazon - they have literall...

@trublu2nu

That 20~30C data means it's rated for 20Amp steady, 30Amp 'burst' discharge. You normally don't want to do bursts of over 10-15 seconds duration as it overheats the LiPo's internals. The beefed up insides of an identical mAh rated battery with higher discharge rates (eg a 2200mAh 20~3...

You GO Grrrl!! Impressive.

(Cute, too) ~8)

"Best soaring stunt you have ever seen" ??

"Wasn't it awesome?"

Uhhhhhhh.....you're kidding, right?

Check out Dynamic Soaring; RC world speed record 446mph.

Now THERE's you some awesome!!

D00d'z one drunk-ass Injun, 's what he is!! *LMAO*

Hi Maccanaut;

What motor are you running in your PZ 109? I sent you a PM in RCGroups (109 thread)....included another question; never heard back from ya & would luv to. Pls check your PMs there.

@1h8u2be "Those damn Americans" were in a war. One they didn't start, if you need reminding.

@youronlycow Like car tires, yes they should, but they don't. Some aren't far off, others, worse. It's simple really - you do understand it's important to use balanced props, right? So 1st, how do you know if you don't put it on a balancer to check? And once you put it on, you'll SEE it's not bal...

I really don't mean to be derogatory, but

A) - Showing you've got one;

B) - Taking it out of its box; and

C)- Telling how you plan to use it....?

Sorry, I just don't see this as much of a "Review".

You didn't even cover what its improvements are, much less what it's now capable of - which su...

Hi Ali...

Subscriber here. Very sorry to learn of your loss - I said before I thought your Alekto was one of the most beautiful RC's I had ever seen, and posted links for others to visit, several times. Very impressive, if nothing else!

I wonder - couldn't you build another? (Since you obviousl...

re Wifey there at the end: now you know why I never got married.

Thanks for the reminder that I made the right choice!!

(Nice 'plane part' too *LOL* -- just picked up my 109 yesterday.)