SP330Y

Hi Mike

If you look close under his mask, you can see it is Harry Potter himself. Let's hope the job turned out more Slitherin than Hogwarts!

can you mix with it, i mean like load some real songs together with this, so for example i would load some cd's or mp3's into my pc, then mix them together.

JUST SEEN IT SORRY,

BASECOAT: HOUSE OF KOLOR BRANDY WINE KANDY

2 coats fo ko seal sealer white

4 coats of nova orange base

5 coats of brandy wine candy base kbc

3 coats of ufc house of kolor clear

Hi, What is the blue colour, do you know the brand and name of the shade?

I know it says blue mamba in the title, but i didn't think that was the colour.

Is it House of Kolor?

Hi, Would the bolts turn back to start rusting again, if you didnt rinse them with water?. I sanded down the cills on my vehicle to bare metal, then rubbed vinegar water on them, which killed the surface rust BUT i never rinsed in off with water.

Two Days later rust had returned, is this because i never rinsed the vinegar off to dilute it?

Where abouts was the Grandad in East Yorkshire?, Is it near the coast?

If Elvis was still alive i think he would look like Jay Leno in this car.

Morgan Freeman loves the word RED, anything to do with it.Look at some of his character names, film titles etc, the word RED always comes up.

It's Iron Bru gold

Hi Bob, If you were painting a car and you went to bare metal, what steps would you suggest in order.

I am spraying my van and i've sanded it down to bare metal in places and there is also a little surface rust on it, is this the right order to do it in.

1) Sand off as much rust as possible

2) Apply KURUST or similar product to rusty parts

3) Spray etch primer over KURUST & over the rest of the bare metal

4) Fill with filler at this point if needed

5) Primer P88 UPOL, sand then topcoats

Excellent gloss level and reflection. Doubt you will even need to colour sand and buff that.

When you were putting the final coat on the door on the rack, i thought it was going to run because you were on the same part over and over again, but it didn't.

That's experience, love the super wide fan from that gun.

Hi, I think ive got it, so........If it's just bare metal with no filling i can use epoxy or etch BUT if there's going to be any body work filler done THEN you can only use epoxy, as etch primer reacts to filler.

Is that right?

Finally, Imagine if you had brand new untreated bare metal.

Which is the better product for that EPOXY or ETCH??

ps. I presume that the etch would be better as it has acid in it, please let me know if i am right or wrong.

WD-40 WATER DISPLACEMENT FORMULAE 40.

Yes it does stand for something, it took 40 attempts to get the formulae right.

Hi Pete,

You have answered a few q's from me already, thanks for that.

Is epoxy primer (2 pack) as good as etch primer for spraying as a first coat onto bare metal? Are they the same thing.

Will the etch primer you sprayed on do exactly the same job as etch primer in stopping surface rust coming back and sealing it?

Thanks Rob from UK

Hi, you said at the end of the video that after brushing on the rust remover, you can them etch prime it. If i sanded my vehicle down to bare metal applied the rust remover BUT i didn't etch prime the rest would that part of the metal rust?, does it 100% have to be etch primed? or could i just apply grey primer over the bare metal if that part wasn't rusted, thanks

My life is now complete x Thank You

Amazing! All the PWL stuff was amazing, all these years later i can appreciate even more how good it was

Hi Pete, I used U-POL P88 grey primer,mixed at 1:1 1 part primer 1 part nitro cellulose thinner.

It says on the tin, high build fast dry gray lacquer primer. It was sprayed on with a HVLP gun in 3 separate coats,yet the rust (not much) has started to come through, more of an orange stain, than rust. Mainly on the wheel arch, where it was originally very rusty, part of the arch was rebuilt with new tinned metal and bondo put in.I dont want to apply top coat until the rust stops coming through.

Find the missing word?.....

1) BURNING BRIGHT

2) HALLOWED TURF

3)............And the answer is?

PREMIERSHIP

Burning bright once again on hallowed turf!!!

Sorry I sold this amp last year for £950 it now lives in Australia, sorry.

I could of sold it a hundred times over, best sound ive ever heard from an amp.

I know what the noise is, it's his Scottish accent and he's saying "Aaargh you doctors" , I just thought it sounded like him farting. He dosn't actually fart but it sounds like it.

Sorry Mike Read was the dj that wouldn't play it not David kid Jenson.

Yes, lets do it, ive tried everything i can directly with them and there not bothered.

Maybe public awareness on FB would be the answer, world wide people would then realise there is a problem with these screens.

What i am doing on YT is only the beginning, i gave them lot's of chances to sort out the problem and they just didn't want to know, maybe they should of listened.

Jesus is still more popular than John Lennon.

Joe killed Danny, It was an accident he got mad and strangled him in that hut on top of the Hill.

Is it really as good as a light with a real bulb in it? I mean is LED that good now

The killers are........

DS Ellie Millers son TOM MILLER and NIGEL CARTER, in it together.

In an interview David Tenant said the killer or killers, bit of a clue there

The killers are........

DS Ellie Millers son TOM MILLER and NIGEL CARTER, in it together.

In an interview David Tenant said the killer or killers, bit of a clue there.

There's only a few singers on this planet known by their first names, Madonna, Beyonce etc that everyone knows instantly but Michael Jackson has taken it one stage further.

If you said to them do you know of MJ? they all know instantly it's Michael Jackson.

I don't know of any other singer in the world (dead or alive) who's ever achieved that, everyone knows him by just two letters.......MJ

That's one hell of an achievement and testament to the man worldwide success.

I love the t-shirt, The ramones, Punk classics

Currywurst is made with Bratwurst and currywurst is the sauce, wurst meaning sausage in German.

Chips are Pomme frites or in englisg fried chips, lecker!!

Can you imagine the divorce!