Resonanttheme's channel
Loading...
15
subscribers
7,453
video views
Uploaded videos
1-10 of 40-
Parallel Plate Capacitor Discharging.AVI
Resonanttheme
139 views
After many tries, I have determined the spark is very hard to capture with this arrangement. I was able to freeze a frame and get a look at it, but the spark discharges fas...
-
Lord Kelvin's Thunderstorm Powering Bells.AVI
Resonanttheme
80 views
Another perspective of the Lord Kelvin water dropper. Very little water will run the bells for longer than you want to listen to them. ha
-
Parallel Plates Charged with Paper and Plastic.AVI
Resonanttheme
95 views
This arrangement has two aluminum plates resting on top of a sheet of 1/4 inch thick LDPE and under that is another plate of aluminum. The plates are about 16.5 inches in d...
-
With and Without Plate Capacitor Effect.AVI
Resonanttheme
87 views
I was using these aluminum plates for other experiments and decided to see how they would do as plate capacitors out of boredom.
-
Plate Capacitor Effect.AVI
Resonanttheme
103 views
Aluminum plates enhancing sparks from a high voltage device. Without the plates the sparks between the points are thinner and quieter although it's not apparent from this c...
-
Leyden Jar made from a high density polyethylene gas can.AVI
Resonanttheme
104 views
This is a perfectly clean gas can with no fumes inside used as a Leyden Jar. There's a small amount of salt water in the can, about 2 inches deep. I found the threads on th...
-
Pint Sized Leyden Jar Charged with Paper Towel and PVC.AVI
Resonanttheme
206 views
Just playing with different arrangements of a Leyden Jar, this one made from a brass lamp part and pint plastic bottle inside a metal jar.It took about 30 strokes to charge...
-
Lord Kelvin's Thunderstorm Powering Bell and Blinking Light.AVI
Resonanttheme
60 views
Small amount of falling water creating static electricity which runs both the bell and light effect.
-
Electrophorus made from a Garrard Turntable.AVI
Resonanttheme
120 views
I've made sparks over two inches long with this heavy aluminum turntable and teflon rod for insulation. Here I'm trying an old technique instead of using your finger to gro...
-
Leyden Jar Bucket with Skillet Lid making a Ten Inch Spark.AVI
Resonanttheme
104 views
I'm trying different shapes and sizes of common, ordinary things around the house to see how they work as a Leyden Jar.
Advertisement
About Resonanttheme's channel
more
less
Play all(40)