RedishMotorsport's channel

Part 2 of 3:

BMW E46 M3 with 2 cracks in the rear floor where the subframe bolts up to. We show how to access the damaged area's by removing the co...

Part 3 of 3:

BMW E46 M3 with 2 cracks in the rear floor where the subframe bolts up to. We show how to access the damaged area's by removing the co...

Part 1 of 3:

BMW E46 M3 with 2 cracks in the rear floor where the subframe bolts up to. We show how to access the damaged area's by removing the co...

Time lapse video showing the complete disassembly of the 318ti Compact Cup race car Interior.

Redish Motorsport are building this E36 Compact Cup ...

First test run of James Nicholson's E30 M3 S50B32 Evo engine conversion.

James had pre installed the S50 engine, Gbox, exhaust, so just required so...

Removing the BMW E46 M3 diff carrier subframe bushes with BMW special tools.

This E46 M3 was in with us as the customer wanted the rear chassis flo...

Mark's Clio 172 which Redish Motorsport installed and welded the weld in multipoint Oreca Rollcage, and added a dash bar, harness bars, camera bar,...

Music video by Mansun performing Wide Open Space.

Replacing the end plate on a BMW E46 M3 chassis leg and also straightening a kink / crease before welding the new end plate on.

This E46 M3 is now...

Finding the source of the knock on Big Mike's BMW M3 S50B30 engine. Removal of the conrod caps to check the bearing shells shows that Cylinder no 1...

Making, shaping, and welding B-pillar Main Hoop gussets to the BMW E46 M3 Race Car.

Installing Powerflex rear axle beam bushes PFR5-305 into a BMW E30 rear axle. Old bushes are removed with the Sealey special tool kit. Very simple ...

Testing time-lapse settings whilst carrying out some quick welding

Removing the S54 engine from Nigel's E46 M3 Race Car build.

The propshaft, gearbox, clutch, flywheel, engine loom, hoses, had already been disconn...