-
RJBTrueBlue99 uploaded 2 months ago
1999 Mustang Cobra rev video
A few revs from my 1999 Cobra.
Mod list:
O/R H-pipe
Flowmaster Delta Flow mufflers
3.73 rear end gears
BBK cold air kit
Superchips dyno tune mak...
-
RJBTrueBlue99 commented 2 months ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@Sk8FalIen I never ran it in this configuration. A few months after this video was taken the engine seized up and I got a rebuilt with Comp 262 cams put in and it went to a new owner after it was fixed. I believe he ran high 13s at 103 mph. It should of ran a little quicker with more practice.
-
RJBTrueBlue99 commented 2 months ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@Mustang46liters Thank you, I always took care of the paint but sadly it went to a new owner almost a year ago. I have since bought a 99 Cobra.
-
RJBTrueBlue99 commented 4 months ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@slspg Thanks ,but I no longer own this car, I have a black 99 cobra now.
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@BillzHearse No I didnt have a supercharger. I originally wanted VT stage stage 2 cams but they were out of stock and VT recommended the Crowers. They were on the car for 80,000 miles until the engine seized. Im not sure if the cams had anything to do with it. With the new engine and smaller co...
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@BillzHearse I just went to there site and clicked on mufflers and what I have are "Original 40 Series - Two Chamber Mufflers"
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@BillzHearse they are more rectangle shaped. The original 2 chamber 40 series. Not the super 40s. I'm not too sure if they make them anymore. I will answer every question but the car went to a new owner on Sunday and I got a nice 93 Cobra clone in return.
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@BillzHearse flowmaster original 2 chamber mufflers and Crower 62802-2 cams
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT
Another drive away video. This one is a little better.
Crower stage 2 blower cams
4:10 rear end gears
Flowmaster american thunder catback
O/R H-p...
@TKO5oh 273RWHP 276RWTQ
-
-
RJBTrueBlue99 commented 2 months ago
Cammed Mustang GT
Exhaust clip of my cammed Mustang With O/R H-pipe and 2 chamber Flowaster mufflers.
Mods include:
Crower stage 2 blower cams
4:10 rear end gears
C&...
@tbraneff Crower stage 2 Blower cams at the time of this video. The engine seized up 75,000 miles after I had them installed. I got a rebuilt engine and had Comp 262 cams put in. shortly after that I got a 99 Cobra.
-
RJBTrueBlue99 commented 2 months ago
@fearlessmustang25 Thanks I no longer own it, I got a 99 Cobra.
-
RJBTrueBlue99 commented 1 year ago
@bladingpro Thank you. I ordered it online from Saleen. I have since sold it because it was rubbing the top of the rear fenders.
-
RJBTrueBlue99 commented 1 year ago
@bladingpro Thank you. I ordered it online from Saleen. I have since sold it because it was rubbing the top of the rear fenders.
-
RJBTrueBlue99 commented 1 year ago
@nightfire1800 Get some long tubes on there and it may be possible. Try getting the plenum and 75mm throttle body too. That may squeeze out a little more power. I have most bolt ons except a mass air meter. If I got long tubes I would expect about 10-15 RWHP best case so that would bring me too ...
-
RJBTrueBlue99 commented 1 year ago
@nightfire1800 In this video its Crower stage 2 cams with stock heads. I have since replaced the engine with a rebuilt one with Comp 262 Cams and stock heads and make 273RWHP and 296RWTQ
-
RJBTrueBlue99 commented 1 year ago
its tight around the top of the fenders. Once it was on there it was there to stay. I never wanted to open my trunk because it was down to bare metal where it rubbed, I couldnt even look at it. I think Saleen puts padding on to avoid that. The car looks a little silly because I had to take the Co...
-
RJBTrueBlue99 commented 1 year ago
@Hollowman110886 Yes its a Saleen wing but I sold it. It looked good but it rubbed the rear quarters so bad I had to have both of them repainted. I had the holes in the trunk filled and had that repainted too. Its wingless now.
-
RJBTrueBlue99 commented 1 year ago
@JerkVegas86 I picked up a 500 mile rebuild for $1700. I'm going to swap over the cams and bolt ons. A new clutch and new valvesprings are going in while its apart.
-
-
RJBTrueBlue99 commented 2 months ago
Cammed Mustang GT 2nd-3rd-4th-5th gear change
Getting on it in 2nd gear going through the gears. Thanks to mbrown818
Mod list:
Crower stage 2 blower cams
C&L plenum
BBK 75mm throttle body
BB...
@irebollar94 They are stock gauges. I can't remember the color. I know longer have the car.
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT 2nd-3rd-4th-5th gear change
Getting on it in 2nd gear going through the gears. Thanks to mbrown818
Mod list:
Crower stage 2 blower cams
C&L plenum
BBK 75mm throttle body
BB...
@SuperMustang2004 I have a pair but they didn't work.
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT 2nd-3rd-4th-5th gear change
Getting on it in 2nd gear going through the gears. Thanks to mbrown818
Mod list:
Crower stage 2 blower cams
C&L plenum
BBK 75mm throttle body
BB...
@JerkVegas86 No catalytic converters.
-
-
RJBTrueBlue99 commented 3 months ago
Matt Hirschman Qualifying Crash @ Thompson 10/15/2011
Matt Hirschman spins while qualifying for the Whelen Modified Tour race at Thompson International Speedway for the World Series of Speedway Racing ...
Did you happen to get footage of the 2 late models sliding on the wall and when one of the drivers threw something at one of the cars? The tour type modified feature was crazy, it was like John DiBurro race at star.
-
RJBTrueBlue99 liked 4 months ago
1999 Ford Mustang SVT Cobra Used Cars Minster OH
http://www.platinumautogrou... This 1999 Ford Mustang SVT Cobra is available from Platinum Auto Group Inc.. For details, call us at 888-326-...
-
RJBTrueBlue99 commented 4 months ago
Star Speedway Jon McKennedy ISMA Qualifying 9/10/2011
Jon McKennedy qualifying the #79 ISMA Supermodified at Star Speedway on September 10th, 2011.
I figured it was when I turned around and saw you filming. Thanks for the Vids.
-
RJBTrueBlue99 liked 4 months ago
Star Speedway "Big John" DiBurro 59 Outlaw Race 9/3/2011
The "Big John" DiBurro Memorial 59 Outlaw feature race at Star Speedway on September 3rd, 2011.
All the racing and carnage that took place in this...
-
RJBTrueBlue99 commented 4 months ago
"The Big One" at Star Speedway 9/3/2011
"The Big One"
A huge 17 car pile-up on a restart during the "Big John" DiBurro Memorial 59 Outlaw race at Star Speedway on September 3rd, 2011
@MistaX8 Did you happen to film the start of this race?
-
RJBTrueBlue99 commented 4 months ago
"The Big One" at Star Speedway 9/3/2011
"The Big One"
A huge 17 car pile-up on a restart during the "Big John" DiBurro Memorial 59 Outlaw race at Star Speedway on September 3rd, 2011
We were there for this race, I have never seen anything like it. 24 cars started 9 finished if I'm correct. The final few laps were great though.
-
-
RJBTrueBlue99 commented 5 months ago
Star Speedway Modified Heats 7/23/2011
Heat Races for the Modifieds at Star Speedway on July 23rd, 2011.
Nice job filming. My girlfriend and I are down to the left a little after the start/finish line. She has a white shirt on and I have the blue wife beater on. The car count seems to be getting better every week. I'm counting down the days until the Star Classic!
-
RJBTrueBlue99 uploaded 7 months ago
Mustang Cobra Exhaust
Exhaust video of my 1999 Mustang Cobra.
-Stock H-pipe with no mufflers
-BBK cold air kit
-3:73 rear end gears
-Lowering springs
-60,000 original ...
-
RJBTrueBlue99 subscribed to Xarmy187 11 months ago
-
RJBTrueBlue99 uploaded 1 year ago
Cammed GT Dyno Pull
500 mile motor dyno pull. All the bolt ons in previous videos minus Crower cams and old engine. In its place is 500 mile motor and Comp XE262AH cam...
-
RJBTrueBlue99 commented 4 months ago
@JerkVegas86 I no longer have this car, I have a Black 1999 Cobra now.
-
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT 1-2 shift
1-2 shift. Notice the 3 cranks to start it. It's cute.
Mod list:
Crower stage 2 blower cams
C&L plenum
BBK 75mm throttle body
BBK cold air kit
Ste...
@element6of6one6 Its been tuned. Made no difference.
-
RJBTrueBlue99 commented 1 year ago
Cammed Mustang GT rev video rev video #2
Some one asked for another video of higher revving because the first video I made I had the 2 step set at 4,000 RPMs so I was unable two rev it a...
@xxx0blivi0nxxxx 1999
-
RJBTrueBlue99 commented 1 year ago
Cammed 04 Mustang GT
built motor with Patriot heads, Comp XE278AH Cams, BBK long tubes and catted H-pipe, flowmaster 40's
Sounds good. Very well done. I'm running a similar setup minus the heads. Does your H-pipe throw a check engine light even though its catted? I have to swap to my stock mid pipe every year for emissions. I run a O/R H-pipe and even If I put my Bassani Catted X-pipe which I'm not a fan of the soun...


Kingpin- Holding Tomorrow
Boston, 1991. Holding Tomorrow 7''
49 views
RJBTrueBlue99 said:
Great BHC band. Thanks for uploading! How about some Said And Done?