PyroTechnix
Loading...
Uploaded videos
1-10 of 25-
65g APAN detonation
PyroTechnix
192 views
This is 65g APAN, detonator was 300mg AP and 700mg ETN pressed into a 7/16" x 2" aluminum tube. The APAN was put in a 1.5" SCH40 PVC pipe and glued at each end. While waiti...
-
14g Picric Acid
PyroTechnix
2,685 views
Small test of Picric Acid to test detonation. Detonator was constructed of a small 1/4" aluminum tub approximately 3" long. Detonator was then placed in the middle of the...
-
I Class Rocket Motor Static Test
PyroTechnix
888 views
This is our first I class motor test. The motor is made out of 1.25" SCH40 PVC. The nozzle is made from dry-lock hydrolic cement with steel washer embedded in the center....
-
30" PVC rocket - First attempt
PyroTechnix
8,691 views
This rocket was entirely built by hand using PVC pipe. The motor is 4 grains 1.75" long, 1" in diameter, with a 7/16" core. The motor has a theoretical thrust of 65lbs and ...
-
First attempt at a rocket
PyroTechnix
1,129 views
This rocket is 4.5' long and 1.5" round. The fins are made of 22 guage sheet metal. The motor is 4 1.75" long grains in a 1" PVC casing with a Drylok convergance and diverg...
-
4" PVC Rocket CATO
PyroTechnix
417 views
This is one of our first attempts at making a PVC motor using a drylok nozzle. The motor was about 4" long with a 3" grain. The grain core was .5" and the nozzle diameter w...
-
Kitty Litter Nozzle Failure
PyroTechnix
760 views
This rocket was made from a 1" section of PVC measuring about 4" in length. The nozzle is made from compacted kitty litter. The grain had a .5" core and the nozzle was 1/4"...
-
4" PVC Motor Nozzle Failure
PyroTechnix
371 views
This motor was made from 1" PVC. The nozzle is made from Drylok with a 1" steel washer with a 1/4" hole for re-enforcement. The launch went relatively well but the nozzle f...
-
4" PVC Rocket
PyroTechnix
1,540 views
This is a 4" PVC rocket that was home made. It uses a solid 3" KNO3/Sucrose grain with a 1/2" core set in 1" SCH 40 PVC. The nozzle is made of Drylok hydrualic cement with ...
-
Home Made 5" Rocket
PyroTechnix
357 views
After several attempts we made a decent rocket and here it is.
The engine on this contained two 2" grains of kno3/sugar fuel. Engine diameter was 1" with a drylock ceme...
About PyroTechnix
This will be a compilation of all the pyrotechnic work myself, my brother and my friend do.
I do not recommended that anyone try or do this at home. These explosions could very well dismember a person or cause severe burns. Everything is done with the consideration of other people and their property.
This is for recreational purposes only and is in no way intended to be used maliciously
For reference there is only 4-5grams in a m100. There are 28grams in 1ounce
If you don't like the videos, think they should be made differently, or just have an idea please post a comment here or on one of our videos. Constructive criticism is always welcome.
This will be a compilation of all the pyrotechnic work myself, my brother and my friend do.
I do not recommended that anyone try or do this at home. These explosions could very well dismember a person or cause severe burns. Everything is do...
Play all(25)