Pennycook2's channel

A test of my homemade electronic dividing head. Bearings and chuck is from the hardware store. Stepper, pulleys and timimg belt from an old scanner...

Just a quick video showing the cleaning process on my Mastercraft Engineering X/Y cross slide milling table - model #500. This is a table I bought ...

Maybe the best solution would be to buy a new tailstock

but this was the solution that I found.

In this five vids I'm going to show a modificat...

Gents GPO master clock 30 seconds impulse debouncer.

By adding this circuit into the drive circuit of the GPO, the occasional double bouncing of th...

Oliver Cromwell passes our garden with the steam trip "Lincoln Imp",sorry for the camera shaking but I was hanging on to our shed roof,and I was a ...

A winters trip out in the snow with our 71/4 Switcher.

Claude Goaty chante le succès de Sidney Bechet

Fonovaligia Geloso mod G 293-V (monta due valvole UCL82, una per canale). Il disco è un 45 giri di Sidney Bechet (Petite Fleur).

More info at: http://www.cad2gcode.com/cn...

Fascinating Aida, Cheap Flights, esl

Making sand cores as used in Metal casting at Home part 1 and 4

In part one I made the sand mould. Now I melt metal and complete the casting.

I get a lot of questions about the sand I use. Here is my first attempt at making my own greensand. The results are very good. It was a lot of work...

How I machined the casting I made. This is a large casting for my machines so some unusual set ups were used. You can see the casting being made in...

This is a preview of a DVD on repairing a one day cuckoo clock (with music box) This priview shows the DVD's Introduction and Summary. Prices and ...

Tubalcain shows how to measure male & female dovetails on the Atlas lathe.

A small turret clock with a Harrison grasshopper escapement from a design by John Wilding