PATCsawyer's channel
Loading...
-
PATCsawyer
liked
2 weeks ago
Josh Groban-''Anthem'' from Chess :)
Joshie performing ''Anthem'' from Chess in Sweden,Children in need,13.12.2008.
Thank you so much for watching.:)
-
PATCsawyer
liked
2 months ago
cross cut saw demonstration
Ian & Phill of the adams axemen showing how well a 1930's diston crosscut saw works when properly sharpened!
-
PATCsawyer
liked
4 months ago
Sopris Trail Crew and the Cross Cut Saw
Work taking place in the Hunter/Fryingpan Wilderness. Forest Service Forestry Technicians. Certified Cross Cut Sawyers.
-
PATCsawyer
liked
6 months ago
Thread Repair Using a TIME-SERT Insert
http://www.repairengineerin...
This is an animation of a thread repair process showing the installation and removal of a TIME-SERT insert.
-
PATCsawyer
commented
6 months ago
That was informative. But, do the inserts need to be the same length as the hole or the bolt used in the fixture? It would seem that the steel insert could be shorter than the actual bolt to allow the same insert to be used for a variety of bolt hole lengths/depths. Just as long as the insert can...
-
-
PATCsawyer
liked
9 months ago
Testing Racing Axes Feb 2007
Testing Tuatahi racing axes
-
PATCsawyer
uploaded
11 months ago
Single underbuck with axe
Sticking an axe in a top bound log and undercutting it using an axe to support the crosscut saw
-
PATCsawyer
commented
1 year ago
Singlebuck 6.21.2010.wmv
struggling with a hungry saw. Waaaaaay toooooooooo many cuts!
Your April video was much smoother. Did you have the saw filed more aggressively between the videos? Did you file it? Did your filer put any end lead in the rakers? Just curious.
-
PATCsawyer
liked
1 year ago
-
PATCsawyer
liked
1 year ago
Dora Labette - Puccini - La Boheme - Mimi's Farewell
Dora Labette sings "Mimi's Farewell" from Puccini opera "La Boheme"
-
PATCsawyer
commented
1 year ago
TU-17 Griphoist operation
How to work the clutch, insert the wire, and operate a TU-17 Griphoist winch.
Trail work, mostly. Moving boulders and tensioning high lines.
-
PATCsawyer
uploaded
1 year ago
How I Maintain a TU-17 Griphoist for Trailwork
TU-17 Griphoist teardown and reassembly; tool maintenance
-
PATCsawyer
commented
1 year ago
Torqhoist has the exploded views of all their Griphoists in pdf format. Just search on that name and go through their catalog to the page you need.
-
PATCsawyer
commented
1 year ago
My experience is with TU-17s and 28s, which are pretty much the same. Not having dismantled a T-series machine, I can't give you any experiential advice. However, if all T-series machines are of similar design, the following link might be helpful if you decide to go inside the case: Google> Blue ...
-
PATCsawyer
commented
1 year ago
I do not have a T516. Do you mean the clutch release lever? If something has fallen into the case, it could be jamming the clutch. Hard to say without looking inside. I've found all sorts of crud inside my 17s. Turn it upside down and give it a good shake while working the levers. If you hear som...
-
-
PATCsawyer
liked
1 year ago
To Life: Vanessa's Wedding Surprise
My surprise for my wife Vanessa on our wedding day. All of Vanessa's close friends and family rehearsed for a month in secret, leading up to the re...
-
PATCsawyer
commented
1 year ago
The Crosscut Sawyer
The Crosscut Sawyer - USDA Forest Service 2007 - Publication 0723-2D02-MTDC - Missoula Technology Development Center. Crosscut saws are experiencin...
Nice job, especially those slow motion close ups showing what is happening as forces compress or pull apart the wood fibers.
-
PATCsawyer
liked
1 year ago
-
About PATCsawyer's channel
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
It appears that YT won't let me post a web address in a comment. For a good discussion on crosscut saw filing and related topics, visit crosscutsawyer(dot)com
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
@Williamolsenjr YT won't let me post my full comment, but for some reason lets me make this response. Must be a bad character somewhere.
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
@jcorb3380 Do you file the saws you collect?
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
If your saw has a consistent arc (not always the case), place the jointer on the saw and see how many teeth are making contact with the file (shine a light up under the file for a better look). If too flat or too curved, adjust the jointer's screw until all teeth are touching the file. Better to ...
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
You will not likely find a non-named brand tool for this job. Surf Ebay, as there are lots of crosscut saw tools up for auction. Other than the Simonds 342, The Atkins #3 and #4 are execellent raker gauges, but hard to come by, Simonds 550 and Galt 460 are good for small saws, and Atkins #15 is a...
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
The Simonds #342 is a good combination jointer, as it also has a swaging pin and a raker filing plate. The raker pin and filing plate plate may be too wide for your small saw though.
How I Sharpen a Crosscut Saw
Step-by-step procedure for filing a one-person crosscut saw.
22,369 views
PATCsawyer said:
I've not used that method, but vinegar is a known rust remover. Depending on how rusty/pitted the saw is, you may still need to follow up the vinegar treatment with oil and light sandpaper or steel wool to get it clean.
+ View allshow less