Official Tarox
Loading...
10
subscribers
11,067
video views
Uploaded videos
1-10 of 18-
TAROX caliper cleaning Step 3
OfficialTarox
2,843 views
Most alloy wheel cleaners are strongly advised against when Tarox calipers are fitted. This is because all TAROX brake calipers are anodised and not coated -- anodising is ...
-
TAROX caliper cleaning Step 2
OfficialTarox
2,546 views
Most alloy wheel cleaners are strongly advised against when Tarox calipers are fitted. This is because all TAROX brake calipers are anodised and not coated -- anodising is ...
-
TAROX caliper cleaning Step 1
OfficialTarox
1,745 views
Most alloy wheel cleaners are strongly advised against when Tarox calipers are fitted. This is because all TAROX brake calipers are anodised and not coated -- anodising is ...
-
Step 04
OfficialTarox
319 views
Remove the original brake discs -
WARNING:
The following instructions are for information only and are not meant to be used as fitting guide by non professionals . It i...
-
Step 15
OfficialTarox
229 views
Take the first test drive with new parts at moderate speed, making sure that all the newly fitted parts are perfectly clear and work without obstruction. - WARNING:
The fo...
-
Step 14
OfficialTarox
196 views
Offer up the road wheel to check clearance. Should it be necessary to add a spacer to obtain clearance make sure longer wheel stud /nuts are used for the sake of safety. ...
-
Step 13
OfficialTarox
299 views
Bleed the brakes making sure that there is no air in the system . TAROX recommend the use its RoadRace brake fluid - WARNING:
The following instructions are for informati...
-
Step 12
OfficialTarox
587 views
Fit the new brake lines supplied, ensure all washers are in place and all connections are tight but do not over tighten - WARNING:
The following instructions are for info...
-
Step 11
OfficialTarox
549 views
Offer the caliper up to the mounting bracket and check clearance . Add shims supplied if necessary. Bolt the caliper to the mounting bracket and tighten all bolts to the m...
-
Step 10
OfficialTarox
320 views
Offer up the new brake disc to check the clearance between the hub carrier , the disc and the bracket, then attach using the original mounting bolt - WARNING:
The followi...
Advertisement
Play all(18)