Model Rocketry How-To Videos
Loading...
182
subscribers
101,943
video views
Uploaded videos
1-10 of 14-
How to Make A Paper Transition for Model Rockets - Part 3
No1Rocketman
6,709 views
Making a paper transition section for a model rocket - Part 3. Here you'll see the secret glue that I use to get a perfect curve on the outer surface of the transition. The...
-
How To Build A Rocket Transition Section Part 2
No1Rocketman
2,721 views
In part 1 we created the pattern for the transition by using the RockSim software or the equations found in the book "Model Rocket Design and Construction." We'll start to ...
-
How to Make A Rocket Transition Section: Part 1
No1Rocketman
4,539 views
Transition sections on a rocket connect tubes of different diameters. It also smooths the airflow between the two size tubes and lowers the drag. In Part 1 of this video yo...
-
Make a model rocket payload bay
No1Rocketman
5,444 views
Payload bays are easy to make if you have that special shoulder piece that connects the tubes together. But solid balsa wood cylinders are expensive. A cheaper alternative ...
-
selecting motors
No1Rocketman
16,623 views
How to select rocket motors for the rocket kits found at the Apogee Components web site. http://www.apogeerockets.com. This video is embedded into our web site, so it may n...
-
Make Your Own Rocket Tube Couplers
No1Rocketman
6,240 views
If you want to create a long model rocket from two shorter tubes, you'll need a tube coupler. Here you'll see the steps to make your own! To get your own high-quality tubes...
-
Strengthening Centering Rings On Your Model Rockets
No1Rocketman
2,452 views
Want to make stronger engine mounts for your model rockets without going to expensive plywood rings? In this video you'll see three methods you can use to add strength to t...
-
Cut a tube with strip of paper
No1Rocketman
2,851 views
How to cut model rocket tubes to length - Method 2. This method works much better with bigger tubes than with smaller one. To see our other videos, visit: http://www.apogee...
-
Cutting small diameter model rocket tubes
No1Rocketman
3,333 views
Cutting body tubes for model rockets is a skill that you'll need if you want to make your own designs. Here you'll see one of the techniques that works great for small tube...
-
Mount an altimeter in a model rocket
No1Rocketman
8,709 views
How to mount an altimeter into a model rocket. There are many good rockets that can be used for science fair projects, but often the payload bay is too short for the altime...
Advertisement
About Model Rocketry How-To Videos
more
less
Play all(14)