Canal de Navegante7M

www.lewisrazors.com

double wheel hollow grinder, rough grinding an 8/8s razor

The SPIDER SANDER offers more versatility than a standard disk sander attachment.

The SPIDER SANDER has been designed for long life using inexpens...

Fairing and sanding the hull in preparation for fiberglassing.

This series of videos shows the steps of building a wooden kayak using the "strip-p...

The deck-hull joint of the kayak is reinforced with fabric tape saturated in epoxy resin. The tape is rolled out on the inside seam using a brush o...

Setting up the forms to build a strip-planked wooden sea kayak. The strongback is an aluminum extrusion. Form spacers are made of pine and the form...

Cutting the building forms for a strip-built kayak. The forms are cut out of 1/2" thick MDF (medium density fiberboard).

This is the first in a n...

How to taper the end of strip to perfectly match it's neighbors when you are building a strip-built wooden boat such as a sea kayak

Trailer. PlanetSolar, the First Around The World With Solar Energy !

Puck 25-30 Knots

Dovetail connections provide quick and secure hull assembly.

Photos showing several steps in the construction of a wood strip Kayak

バンドソーにつきものの｢ドリフト現象｣を魔法のように解消して­しまう、｢OTORO ドリフトフリー・バンドソーテーブル｣が標準付属。

KERV ドリフトフリー・バンドソー DF-14は、1.5馬力のパワーと19mmのブレードで大きな­丸太も力強くカットします。

http://www.off.co.jp/

A short video that shows steam bending ribs in a 10'6 "Sunshine''

Each wood strip was hand-planed, along one edge, to match the curve of the hull and deck and then glued to the previous strip on the form, and held...

Recorded at Kungsbacka, Sweden - trying out our Windrider 17 trimaran before buying it.

Hunt, Fish & Camp on a Sailboat. Fishing and camping conversion kit for WindRider Trimarans

A broad overview of the process of building a strip planked sea kayak. Nick Schade of Guillemot Kayaks http://www.WoodenKayaks.com demonstrates the...

Laiva

Building two Melonseed Skiffs. Two and a half years of work compressed into 300 seconds. More info here:

http://www.eyeinhand.com/Ma......

The Gannon and Benjamin Marine railway on the island of Martha's Vineyard is at the forefront of a movement built on the past: building wooden boat...

This is me building my Explorer prototype, this part is about the making of the neck, the first neck i built that u can see in the end of part 1 wa...

This is some pictures of me building a Explorer prototype, this is part one and contains most of the bodywork, there will be a part two later.

Arpeggios From Hell!!!

Unbelieveble Arpeggio shred by the one and only!!

The Open 40 is an ocean racing yacht. When the Class 40 rule is applied to this downwind screamer it can make it a budget conscious ocean racer. ...

Living history wooden boat builders. Scale models are used as teaching tools to build classic bluewater sailing vessels. Steam bending oak and chis...

Lancha La Javy de Castro Chiloe 27 de diciembre 2011

My Carnival costume for 2010, inspired by the big headed low polygon characters found in video games. I opted for a faceted geosphere look.

Softwa...

http://www.tamasoft.co.jp/p...

http://halocostuming.wikia....

partes del mark 6, (halo 2)

http://halocostuming....

Entrevista realizada a Roberto Fantuzzi, destacado empresario. En la entrevista se refiere a las politicas públicas sobre capacitación y empleo; de...

富士見村の現代からくりおもちゃ館にて撮影。

If you want to know more about my work, visit my blog on http://kamuicosplay.blogspo...

or follow the progress of my projects on facebook

http:/...

We made a scull to ride the waves - Benjamin naratted his story to Chanaka about his Trans-Atlantic saga. Chanaka wanted to circumnavigate Sri Lank...

Follow me on Twitter to get frequent construction updates and notified of new videos: http://twitter.com/#!/Lonel...

Subscribe here on Youtub...

How tough are Skin on Frame boats?

How tough are skin on frame boats? Probably tougher than you think!

the recording of the episode without the explanations.

How to build a cedar strip kayak. First we set-up the strongback and molds, then install the cedar strips and fibreglass the hull. Then we make the...

Viaje por Mochima a bordo del E/V Raspinfly

spyder chrome

Custom 08 Can Am Spyder - BRP totally customized with Two Brothers Exhaust