MsNEEKA1's channel

FOLLOW US BUILD & SHARE WE ARE HERE TO WORK WITH POSITIVE LIKE MINDED INDIVIDUALS...

Performed By

http://www.twitter.com/just...

http://www.twi...

FOLLOW US BUILD & SHARE WE ARE HERE TO WORK WITH POSITIVE LIKE MINDED INDIVIDUALS...

Performed By

http://www.twitter.com/just...

http://www.twi...

http://www.ford-wiki.com/wi...

304 isky mega racing cam idling rpm edelbrock perf.rpm cylinder heads holley dominator msd probillet harland sharp rockers arms

Taking the 72 ford for a test spin. Turning over some serious rubber!

Ford Gran Torino Sport Fastback Cobra Jet 1972 heading to its new home. It is the Cleveland 351/4.

The restoration process is starting now.

Btw, h...

my husband is selling his nova and trailer and wanted one last look

383 eagle forged steel crank, eagle h beam rods, srp forged pistons, .533 .555 solid cam, 2.02 1.60 cast iron heads fully ported, victor jr intake,...

12:1 compression 383 in street truck(driver-race some times)7.5 1/8 mile

High horsepower engine 383 stroker

A little video taken of my 85 monte. just getting into the secondaries a little.... Enjoy and turn up your volume. I know you'll ask so here is w...

72 red chevy c10

This is my 1972 gmc shortbed stepside that I am building, I still have alot todo, but I just got it painted. My first paint job, and first time bu...

Gotta love that sound !!!!!

Chevelle w/ a 454 BBC, open Headers, on stone cold start up. It starts to idle normal about the 2:00 mark. No choke as its a race carb.

355, Edelbrock RPM Intake Manifold, Demon Carb, AFR 190 Heads, Complete MSD system, Comp Cams "292" Magnum. Vintage Air Gen IV, Tremec 5 Speed, 9...

355 small block isky 292 mega cam 11.1.1 compression OEM Stuff haha

Thumpr Camshaft 287/ 305, Lift .489/ .476, Edelbrock Performer Intake, MSD Ignition, Hooker Long tube headers with H pipe and dual Flowmaster 40's.

sbc 355 idling and revving up with lunati bracketmaster 292 480 in it. just got my new cam and heads installed and personally i think it's awesome....

KAG This is my baby, a mean little 331 stroker with nasty cam. LSA 107

~78 Malibu G-Body with a new engine in it. It used to have a plain jane 305... now it has a 305 HO :)

Build process in timelapse, first start, cam...

1986 Z28 with a 355 and 280H Comp Cam, this engine has low compression heads.... the engine was rebuilt before I got it, but I myself have done all...

This was my 1988 Chevrolet Monte Carlo SS project car. The motor was a .040" over 350 with forged Probe pistons, Lunati .515" Bracket Master II cam...

Part # HP36

A Vortec headed 383 stroker that puts out 379HP/460TQ. Scat rotating assembly with 10.1 compression, hyd roller cam, weiand stealth dual plane inta...

just making sure the battery still works

HOT ISH MAKE YOU WANA LIGHT UP

Free Mixtape: http://indy.livemixtapes.co...

350 SBC Recently built pan to carb, Big Mutha Thumper Cam, Double hump heads, Gear drive, Demon 650cfm carb, Air gap manifold, Plus Turbo 400 trans...